軟體下載 Memtest86 8.3

• 1

  版本確認

• 2

  檔案準備中

• 3

  檔案下載

What's new in this version:

Memtest86 8.3
- Added AUTOREPORT configuration file parameter to enable/disable automatic saving of test results HTML report when AUTOMODE is enabled
- Added TFTPSTATUSSECS configuration file parameter to set the period to send status XML updates to TFTP server (for management console)
- Modified behaviour for detection of duplicate errors. Errors with the same address (and bits) but occur in different tests are no longer considered to be duplicate
- Fixed hang when CPU does not support SSE4.1 instructions when running Test 12
- Fixed MINSPDS and EXACTSPDS configuration file parameters being incorrectly set when saving current configuration settings to file
- Fixed escaping of characters in XML messages to TFTP server (for management console)
- Fixed invalid XML tag in XML messages to TFTP server (for management console)
- Report is now automatically saved before the end of test prompt when AUTOMODE=2 is set in configuration file
- Fixed incorrect reference to blacklist flag 'TEST12_ONECPU' (correct flag is 'TEST12_SINGLECPU')
- Updated Russian translations (courtesy of Victor Lutz)
- Added better sanity checking for SPD bytes
- Updated JEDEC manufacture list to JEP106AZ (May 2019)
- Fixed channel mapping for Apollo Lake ECC detection
- Fixed ECC detection for certain Intel Skylake-SP chipsets


Memtest86 8.2
- Added REPORTPREFIX configuration file parameter to specify the prefix text to use for the report files
- Added TEST12_SINGLECPU flag to blacklist.cfg to force test 12 to run in single CPU mode as a workaround for CPU threads hanging in PARALLEL mode
- Added DISABLE_LANG flag to blacklist.cfg to disable language support and font support, which is known to cause issues on some Dell systems
- Changed the blacklist.cfg RESTRICT_ADDR flag lower address limit from 0x1000 to 0x100000, as some systems experience issues when writing to the BIOS area (up to 0xFFFFF)
- Fixed bug with blacklist.cfg RESTRICT_ADDR flag not setting the lower address limit properly
- Fixed buffer overrun bugs detected by HeapGuard when measuring memory latency
- Fixed fluctuations in memory/cache speed measurements
- Fixed UI issues with System Information screen
- Changed "red" error text to "light red" for better readability
- Fixed CPU temperature readings for several AMD Ryzen chipsets
- Added reporting of Module Manufacturer's Specific Data in DDR4 SPD modules to PXE server for use with Management Console (Site Edition only)
- Fixed timing issues with retrieving SPD data on Skylake-X chipset
- Fixed decoding of DDR4 SPD Post Package Repair (PPR) (Byte 9)
- Fixed decoding of DDR4 SPD Secondary SDRAM Package Type (Byte 10)


Memtest86 8.1
Fixes/Enhancements:
- Added version information and total CPU threads to test summary screen
- Increased maximum number of CPU threads to 256
- Added text colour to error messages during testing
- Added Mac Mini 2018 to blacklist which sets the lower address limit to 0x1000 by default
- Fixed bug in detection of hyperthreads when the number of CPU threads exceeds the maximum
- Fixed incorrect JEDEC manufacture names (Bank 10)
- Fixed missing RAM part number / serial number obtained from SMBIOS in HTML report
- Fixed incorrect channel/slot number for ECC errors on Skylake-SP chipsets
- Fixed bug in specifying the number of test passes for Free version