MKVToolNix (64-bit) 歷史版本列表
更新時間：2023-12-03
更新細節：
What's new in this version:
New features and enhancements:
- mkvmerge: MPEG transport stream reader: HEVC/H.265: added support for reading single-layer Dolby Vision from Annex B type bitstream read from MPEG transport streams. Partially implements #3113.
- mkvmerge: MPEG transport stream reader, HEVC/H.265 elementary stream reader: added support for reading dual-layer Dolby Vision with both the base & enhancement layers in the same track from Annex B type bitstreams in MPEG transport files & elementary stream files. Implements #3126.
- mkvmerge: MPEG transport stream reader: HEVC/H.265: implemented combining dual-layer Dolby Vision with base & enhancement layers in different tracks. Implements #3127.
- MKVToolNix GUI: multiplexer: added a new option in the preferences for always enabling 'forced' subtitle tracks. A subtitle track is considered to be 'forced' if: the corresponding property is set in the source file; the track's name contains the word 'forced' (in English); deriving the 'forced display' flag from file names is active & the file name matches the corresponding pattern. The option is disabled by default. Implements #3627.
- MKVToolNix GUI: multiplexer: the functionality for detecting file name sequences when adding files can now recognize the patterns used by GoPro's cameras for chaptered video files. Implements #3633.
- xyzvc_dump: the end position of the current NALU will be output in non-portable format as well.
- xyzvc_dump: HEVC: the tool will now also output the inner NALU type of Dolby Vision NALUs (`unspec62` and `unspec63`).
Fixed:
- mkvmerge: when the user requests processing be stopped after the video ends
- mkvmerge` will now take appending files into account properly. It won't stop processing unconditionally after the first file ends anymore. Fixes 3618.
- mkvmerge: AV1 handling in readers: the readers will now provide the pixel dimensions to the AV1 packetizer as early as possible, just like for other video packetizers. That way the pixel dimensions are available for calculating the display dimensions when command-line options such as aspect-ratio` & `--aspect-ratio-factor` are used. Before the change the calculation was done based on initial pixel dimension values of 0x0, resulting in display dimensions of 0x0, too. Fixes #3611.
- mkvmerge: HEVC/H.265 packetizer: when reading & appending HEVC/H.265 from Matroska, MP4/MOV or FLV files the first frame of all the appended files was sometimes dropped, resulting in broken video at the point where video is appended. Fixes #3479.
- mkvmerge: MPEG transport stream reader: when reading MPEG transport streams from Blu-rays the four-byte long `TP_extra_header` structure in front of the transport packets are now skipped properly. Before the fix a stray byte with value of `0x47` inside that `TP_extra_header` structure could have thrown off the detection of where the transport packets start, leading to mkvmerge dropping a few audio and/or video frames at the start of the file. Fixes 3632.
- mkvextract: AAC extractor: when an invalid program config element in the GA-specific config element is encountered, the program config element will be disregarded, which avoids mkvextract aborting with an exception. Fixes 3606.
- xyzvc_dump: fixed the tool aborting with an exception when the last NALU in an Annex B type file was shorter than four bytes.
Other changes:
- AVC & HEVC dumper development tool: the tool has been renamed from xvc_dump` to `xyzvc_dump` as `xvc` is an abbreviation for an existing video codec (Extreme Video Coding), and the tool has nothing to do with that codec.
更新時間：2023-12-03
更新細節：
更新時間：2023-11-17
更新細節：
What's new in this version:
Improvements:
- In App Notifications Toggle
Fixed:
General:
- Fixed an issue where the White Balance would be wrong on Capture One generated HDR and Panorama images
- Fixed an issue where Subject Mask on portrait oriented images would sometimes cut off some of the subject
- Fixed an issue where Styles were not applied to iPhone 15 Pro Max DNG
Windows:
- Fixed an issue where it was possible to add images to Projects
- Fixed an issue where newly created Documents would not select the last used Export Recipe
- Fixed an issue where it was not possible to paste special characters into Keywords
- Fixed an issue where Layers would become unsavable in Styles if AI Select had been used on them
- Fixed an issue where using Luma Range could lead to a hang
Camera Support:
- Leica M11-P
- Panasonic Lumix DC-G9 II
Lens Support:
- Canon RF24-105mm F2.8 L IS USM Z
- Canon RF200-800mm F6.3-9 IS USM (+ extenders)
- Canon RF-S10-18mm F4.5-6.3 IS STM
更新時間：2023-10-30
更新細節：
What's new in this version:
New features and enhancements:
- MKVToolNix GUI: if the system's locale uses one of the Han scripts, the GUI will force Arabic numerals to be used in spin boxes. This prevents Suzhou numerals from being used which seems to be the default on Windows systems sold in China.
Fixed:
- build system: fixed detection of Qt6 if `clang` is used for compilation on Linux. In that case Qt's `qmake` added a `gcc`-specific option that `clang` doesn't understand, `-mno-direct-extern-access`. `configure` will now pass the parameter `-spec linux-clang` to `qmake` so that it uses the correct compiler flags.
- build system: fixed the use of `mktemp` to be more portable to e.g. macOS
- mkvmerge: if a video aspect ratio was given with `--aspect-ratio-factor`, the code would apply a second factor based on the pixel resolution, resulting in much too large values for the `DisplayWidth` element. For example, with a pixel resolution of 720x520 & an aspect ratio factor of 1/1 the result should be 720x520, but instead it was 900x520. Up until release 76.0 this has only happened when a track order was given (which unfortunately includes all invocations with MKVToolNix GUI as it always includes the track order). Starting with release 77.0 this has always happened due to the automatic sorting of tracks implicitly creating a track order, even if none was given.
更新時間：2023-08-21
更新細節：
What's new in this version:
- Can make GPT UEFI bootable USB drive
- Some minor bug fixes and enhancements
更新時間：2023-08-21
更新細節：
What's new in this version:
New features and enhancements:
- Mkvmerge: AV1: added support for reading Dolby Vision from AV1 IVF & OBU streams
- Mkvmerge: MPEG TS reader: added support for colors in teletext subtitles
- MKVToolNix GUI: multiplexer: when adding files the GUI can automatically enable the "forced display" flag for subtitle tracks if the file name contains the word "forced" delimited by certain characters (configurable). This feature is turned on by default.
- MKVToolNix GUI: multiplexer: added the option `--stop-after-video-ends` to the dialog for additional command line options.
- MKVToolNix GUI: multiplexer: when adding Blu-ray playlists the dialog allowing the user to select the playlist to add will now show audio & video track properties as well (pixel dimensions for video; sampling frequency, channels for audio).
- MKVToolNix GUI: header editor: in order to reduce confusion with users non that versed in Matroska elements, the naming of the two "language" track properties has been changed: the old element is now titled "Language (obsolete)" & the current, IETF BCP 47 based one is simply called "Language".
- MKVToolNix GUI: preferences: you can now use the "delete" key to remove entries from simple list widgets for strings (e.g. the list of recently used destination directories).
Fixed:
- Mkvmerge: DTS reader: if a DTS stream doesn't start with a DTS core but a sub-stream element (EXSS), the reader will now look for a core. If found, it'll start processing from there instead of from the start. This fixes the timestamp calculation if the sampling frequency in the core & in the extensions are different.
- MKVToolNix GUI: multiplexer: the "emphasis" and "stereoscopy" combo-boxes now have a much smaller minimum width, allowing to make the whole "properties" pane much smaller again.
- MKVToolNix GUI: macOS: when you install the application from the DMG it'll no longer register itself as an alternate handler for its supported file types. It seems like this overrode existing associations, forcing people to change them manually to whatever they wanted them to be. Additionally this forced the associated file to always be shown with an MKVToolNix icon. The GUI's own `.mtxcfg` files will still be registered. .
更新時間：2023-08-21
更新細節：
What's new in this version:
New features and enhancements:
- Mkvmerge: AV1: added support for reading Dolby Vision from AV1 IVF & OBU streams
- Mkvmerge: MPEG TS reader: added support for colors in teletext subtitles
- MKVToolNix GUI: multiplexer: when adding files the GUI can automatically enable the "forced display" flag for subtitle tracks if the file name contains the word "forced" delimited by certain characters (configurable). This feature is turned on by default.
- MKVToolNix GUI: multiplexer: added the option `--stop-after-video-ends` to the dialog for additional command line options.
- MKVToolNix GUI: multiplexer: when adding Blu-ray playlists the dialog allowing the user to select the playlist to add will now show audio & video track properties as well (pixel dimensions for video; sampling frequency, channels for audio).
- MKVToolNix GUI: header editor: in order to reduce confusion with users non that versed in Matroska elements, the naming of the two "language" track properties has been changed: the old element is now titled "Language (obsolete)" & the current, IETF BCP 47 based one is simply called "Language".
- MKVToolNix GUI: preferences: you can now use the "delete" key to remove entries from simple list widgets for strings (e.g. the list of recently used destination directories).
Fixed:
- Mkvmerge: DTS reader: if a DTS stream doesn't start with a DTS core but a sub-stream element (EXSS), the reader will now look for a core. If found, it'll start processing from there instead of from the start. This fixes the timestamp calculation if the sampling frequency in the core & in the extensions are different.
- MKVToolNix GUI: multiplexer: the "emphasis" and "stereoscopy" combo-boxes now have a much smaller minimum width, allowing to make the whole "properties" pane much smaller again.
- MKVToolNix GUI: macOS: when you install the application from the DMG it'll no longer register itself as an alternate handler for its supported file types. It seems like this overrode existing associations, forcing people to change them manually to whatever they wanted them to be. Additionally this forced the associated file to always be shown with an MKVToolNix icon. The GUI's own `.mtxcfg` files will still be registered. .
更新時間：2023-08-21
更新細節：
What's new in this version:
- Using Babel in Android build to ensure compatibility with Android 7+ (Chrome 51+) webviews
- Fixed and improved hardware acceleration control, lost since migrating NW.js -> Electron
- Minor bug fixes and improvements
更新時間：2023-08-21
更新細節：
What's new in this version:
R-Studio 9.3 build 191230
Improved:
- NTFS deduplication processing has been improved
- Passwords can be shown in their dialog boxes
- It's now possible to mark/unmark empty folders through Find/Mark dialog box using the Mark All/Unmark All command
- R-Studio now shows multi-pass imaging statistics after the imaging process is completed
Fixed:
- The program may have frozen rarely while opening ext fs partitions
- R-Studio couldn't correctly load multi-file images if their parts are located in different places
- R-Studio may have aborted data recovery when the Skip button was clicked under some rare circumstances
R-Studio 9.3 build 191227
Fixed:
- Minor internal bugfixes
R-Studio 9.3 build 191223
New features:
- Support for the ReFS 3.10 file system.
- Support for Bitlocker Drive Encryption. R-Studio can decrypt both BitLocker Drive Encryption and BitLocker ToGo volumes using either a password, recovery key, and a .bek file. R-Studio Technician/T80+ can also use FVEK (Full Volume Encryption Key) or VMK (Volume Master Key) data for decryption.
- Support for VHD/VHDX/VDI disk image formats. All R-Studio versions can load these files, R-Studio Corporate and Technician/T80+ can create them.
- Read-only support for the dmg files (Apple Disk Image: all versions ), e01/(ewf) files (Expert Witness File Format: R-Studio Technician/T80+), and aff files (Advanced Forensic Format: R-Studio Technician/T80+).
- Support for creation of encrypted RDR image files (the main disk image format for all R-TT, Inc products).
- Support for SCSI/NVME translation for external USB/NVME boxes. Among other things this makes it possible to obtain S.M.A.R.T. attributes for such devices.
Improved:
- R-Studio Technician/T80+
- Multi-pass Imaging Phases can be enabled/disabled on-the-fly
- All data from the Properties tab can be copied in one command
- Symlinks can be exported to custom recovery lists either as real folders or as symlinks
- Search for files has been added to the HTML custom recovery lists
Changed:
- New icons for storage devices
R-Studio 9.2 build 191166
Fixed:
- A progress bar may have rarely crashed under specific circumstances: closing dialog box and showing a warning message at the same time
- The dialog box of file opening used with a connected remote computer may have crashed (the Windows version)
- Sometimes, the device root wasn't marked as Root which led to problems in moving around files
- Folder-links may have been marked incorrectly when a recovery lists with file IDs was loaded
- Moving around links to folders which are actually files may have been incorrect
- Several bugs connected with symlink processing on UNIX file systems have been fixed
- Detection of cyclic symlinks may have been incorrect
R-Studio 9.2 build 191153
- Change log not available for this version
R-Studio 9.2 build 191144
Fixed:
- A cosmetic bug on the Find/Mark dialog box in the R-Studio Standalone/Corporate licenses has been fixed
R-Studio 9.2 build 191140
- Change log not available for this version
R-Studio 9.2 build 191126
New features
- Disk scan has become available during multi-pass imaging
- Search/mark/mask can be specified by bad sectors and runtime imaging status
- A completed runtime image can now be either resumed or re-written
- The creation time and accessed time data has been added to the forensic report
Improvements
- A data grid has been added to the I/O Monitor window
- Keyboard navigation in the folder tree has been added to the HTML recovery lists
- A sector map window may be opened directly from the message about successful opening the sector map file
- A color scheme and legend have been improved on the I/O Monitor window
Fixed:
- The I/O Monitor window showed incorrect info after resizing
- The I/O Monitor window showed broken pictures with 200% scaling
- An unnecessary message about post actions may have appeared in email notifications
- User's file type file may have been ignored during program startup
- R-Studio showed ? in names in links as small squares
- R-Studio couldn't find formatted exFAT partitions when they contained only root folders (without subfoders) and their roots was rewritten
- Unstable sectors were treated as bad
- An unnecessary tooltip may have appeared in the I/O Monitor window
- Sometimes incorrect marks may have appeared in the top level of the folder tree
- Incorrect data may have appeared in the Accessed Time column
- Some fixes in the algorithm of recovery chances estimation
R-Studio 9.2 build 191115
New features:
- Data storage types (SSD, HDD, USB, etc) info has been added to the Drives pane
R-Studio Technician:
- A new option "Skip files with bad sectors" has been added to runtime imaging of individual folders/files
- A new option "Unused clusters only" has been added to the multi-pass and complete runtime imaging options
- New file formats for recovery lists have been added: HTML, XML, JSON, and CSV. The new formats, especially the HTML one, allows the customers to easily edit recovery lists in their web browsers and then send edited lists back.
Improved:
- Speed for runtime imaging of individual files has been significantly increased, especially for many small files. (R-Studio Technician)
- Several tabs can now be moved by dragging them with the mouse
- Processing of various non-printable characters in file names has been improved
- Hints for shortcut menu items are now shown in the status bar
- Search for and opening of file regions is now faster
Changed:
- Save/Load File Names menu items and commands have been renamed to Export/Import Recovery List
Fixed:
- The path to runtime image was processed incorrectly for runtime imaging on its dialog box
- Hardlinked files may have been recovered incorrectly
- The Estimated size value on the Create Image dialog window may have not changed when the Compression ratio slider was moved
- Files/folders with non-Latin names were not marked after recovery lists were loaded
- No read indicator (R) was shown on the I/O Monitors window while skipping slow areas
- All S.M.A.R.T. icons changed to green after a runtime image was connected
- Names of files which contained something similar to HTML tags may have been shown incorrectly
- Nothing was selected for the Copying mode options on the Smart drive copy tab in Drives Copy Wizard
- It was possible to clear the Enable write option even when runtime imaging was activated
- The program may have crashed when file sorting tabs were switched
R-Studio 9.1 build 191061
Fixed:
- R-Studio may have gone into an endless loop when opening large ext fs partitions
R-Studio 9.1 build 191060
New features:
- The Options and I/O monitor buttons have been added to the Drive Copy Wizard progress dialog box
Improved:
- S.M.A.R.T. attributes detection has been improved
- Symlink processing has been improved
- Opening of partitions with the Ext file system has been accelerated
Fixed:
- The Metafiles folder may have disappeared after Folder rescan
- Information about files marked for recovery was displayed incorrectly when a file mask was applied
- Options specified on the Options tab in the Drive Copy Wizard didn't work
- The program may have crashed sometimes
- Memory may have liked during the Recover All Files operation
- An incorrect log message may have appeared after recovery of files with broken names
R-Studio 9.1 build 191044
- Change log not available for this version
R-Studio 9.1 build 191039
Fixed:
- R-Studio may have processed huge ext4fs file systems for too long time
- The Hexadecimal editor didn't close an opened disk when disk wiping started
- It was impossible to stop disk actions with malfunctioning disks
- The Map of file command was active in the left pane of the R-Studio's panel
- Not all information was copied from the Get Info window
- The Files and Folders checkboxes were disabled by default on the Find/Mark dialog box
- File search and mask returned incorrect results for the Modification date
- The Yes to All and No to All buttons appeared on the Save scan info dialog box even when only one tab was opened
R-Studio 9.1 build 191029
Improved:
- Info about multi-pass imaging phases has been added to the log
Changed:
- The default system info file names have been changed to R-Studio-SystemInfo-yyyy-MM-dd
Fixed:
- It was impossible to disable all additional phases for multi-pass imaging in order to enable only the main one
- R-Studio performed Slow areas and Retrying phases of multi-pass imaging even when when they were disabled
- The Map of file command was active in the left pane of the Content panel
- R-Studio threw a Corrupt data error message for ddrescue map files larger than 64kB
- It was impossible to perform sector map operations for incomplete images
- Not all info was copied from the Get Info window
- Missing disks added to Virtual Volume Set or Virtual Mirror couldn't be edit correctly
- Some partition and drive actions could be performed during disk operations like disk scan, RAID consistency check, and so on
- No progress bar was shown during manual update
- Some cosmetic bugfixes
R-Studio 9.1 build 191026
New features:
- Support for 4k sector size for USB Stabilizer has been added
- A new command Close All Images has been added to close all opened images
Improvements:
- The update process of USB Stabilizer drivers has been improved
Fixed:
- R-Studio may have frozen while executing the Recover All Files command
- File sorting may have changed to default (Real file system) when the Show Files command was executed for an already opened tab, or the tab was moved, etc
- Child objects of a wiped drive/partition were not automatically deleted from the Device view pane
- Not all information from the Get Info window was copied
- Sometimes, R-Studio may have crashed on close
R-Studio 9.1 build 191020
New features:
The following items have been added:
- Support for the XFS file system
- Support for Intel Software RAIDs
- Data wiping for drives
Additionally for the Technician versions:
- Runtime imaging for individual folders/files
- Imaging of drive's file system (FS map) only
- Drive and file maps for all supported devices
- Drive imaging to a physical drive rather than to an image file
- New file hash functions sha1 and sha256 to forensic logs
- New extended options to control DeepSpar Stabilizer
Improvements:
- A new option Check sectors status has been added to the Recheck Recovery Chances dialog box
The Technician version
- File enumeration has been accelerated for DDI drives
- Post Actions (Shut down the computer on task completion & E-mail options) have been added to the Options window
Changes:
- The I/O Options button has been renamed to the Options button
- The Forensic Log Settings dialog box has been moved to the Forensic Log Settings tab on the Recover dialog box
Fixed:
- The Close All command appeared in the Partition tab shortcut menu even only one tab was opened
- Questionable folders may have disappeared in the panels after Rescan Folder
- Not all information could be copied from the Get Info window
- Existing zero-sized files had the green mark for recovery chances
- The Preview command was active in the Find Results panel for zero-sized files
- A negative offset may have been entered into the I/O Monitor field
- An image of a password-protected APFS container could not be opened even with the correct password
- File marking results may have been different for different time format
- The information in the Disk Properties tab was updated incorrectly
- Data on virtual block RAIDs with disks with bad sectors may have read too slowly
- R-Studio may have crashed if USB Stabilizer wasn't off during the program closure
- R-Studio crashed when the byte-to-byte imaging was selected in a system with only one disk
- Many cosmetic bugfixes
Test/hexadecimal editor:
- The Find previous command and reverse search may have executed incorrectly
- The Select From/To procedure didn't work correctly with the Search command
- The search command may have been executed incorrectly when the Not equal option was enabled
- The Append command may have been executed incorrectly
R-Studio 9.0 build 190312
Improvements:
- Two new options have been added for RapidSpar: Create Image and Complete Runtime Image
- Estimation of recovery chances has been improved
- The ISO image file type has been added to the File Types list
- During execution of the Complete runtime image, I/O Monitor now shows the read speed of the disk rather than read/write speed
- File System error message codes are expanded for deletion/move errors
Fixed:
- R-Studio Technician for Mac/Linux couldn't be re-registered into the T80+ version. Fixed
- Multi-pass images with several takes were created incorrectly if the Perform reading in reverse order if possible option was selected
- I/O Monitor showed read speed incorrectly
- A sector map file was being written not as often as necessary while completing runtime imaging
- Masked marked files were incorrectly counted
- Tabs may have closed without a due warning
- Deleted files were not marked with the red cross in the Find Results pane
- The Recover Marked button may have been inactive after marking files using the Find/Mark dialog box and when the Skip files with bad sectors option is selected on the Recover dialog box
- The Recover Marked shortcut menu item and button remained inactive when a file was marked for recovery in the Find Results pane
- When there was not enough room for a large file and a new destination was assigned, the leftover of the file left in the first place
- Recovery froze and could not be resumed if a file name and path appeared too long
- Recovery froze from the Extensions tab when the Restore folder structure and Restore from root options were selected on the Recovery dialog box
- It was possible to perform many Drag&Drop operations while performing various drive tasks
- The OK button was active when the Password field was empty on the Enter the password dialog box
- An RDR-type image could not be correctly removed from a virtual RAID
- RAID-connected tabs didn't close when the RAID parameters were altered
- A Virtual Block RAID object may have frozen when another RAID parent was added
- Many cosmetic, wrong messages, and localization bugs have been fixed.
Text/hexadecimal editor:
- The content of the UNICODE and UNICODE+ columns may have merged. These columns could not be resized
- An unnecessary inquiry about overwriting a file after executing the Tools - Save to Binary File... or Save to Hexadecimal file command may have appeared
Third-party hardware:
- R-Studio may have crashed while working with DeepSpar DDI hardware
R-Studio 9.0 build 190296
Improved:
- When a user opens an already opened partition it brings the user to the corresponding tab
- Option processing for the Find/Mark dialog box has been improved
Fixed:
- When the recover options Restore folder structure and Restore from root were selected, the original Modified and Accessed timestamps were changed to the time of file recovery
- The program may have crashed when it tried to restore interrupted runtime imaging saved as a vmdk file
- The program may have crashed when connecting to a remote computer
- Some cosmetic fixes
R-Studio 9.0 build 190295
Improved:
- R-Studio shows now S.M.A.R.T. attributes for NVME SSD devices
- Detection of S.M.A.R.T. attributes have been improved for new hard drive modes
- Processing of the .Trash folder has been improved for macOS file systems
- Processing of encrypted APFS partitions has been improved
- Detection of Disk identity parameters (Vendor name, Product name, Firmware version, Serial number) has been improved
- Additional checks have been made for runtime imaging destinations and sector map files
Fixed:
- Symlinked folders remained marked when their target were unmarked
- Files from symlinked folders may have recovered to incorrect places
- The Advanced Scan dialog box may have shown the Scan area parameter incorrectly after second clicks on the Advanced button
- Strings on Properties panel were selected incorrectly
- The Find/Mark dialog box could not show all opened partitions correctly when they were many
- R-Studio showed files in renamed folders as deleted, although they were not
- Mask presets with time periods 7, 14 days or 1, 3, 6 months, etc. created in version 9 were unnecessary converted to Customs
- R-Studio ver.9 may have crashed when opening older rdi images
Technician version:
- Objects could not be opened in the Hexadecimal editor from DDI drive map files. Fixed.
- R-Studio didn't always show S.M.A.R.T. attributes from USB Stabilizer. Fixed.
- Incorrect objects could be selected for a Destination drive for runtime imaging as Sector by sector clone on a physical drive
R-Studio 9.0 build 190275
New features:
- Several disk objects can be opened in one tab. All these objects can be simultaneously searched for files, their files can be marked and recovered
- Drive imaging can be interrupted and then resumed. When the user stops an imaging process, they have two options: to discard an already created partial image file or to save it to resume drive imaging later. Created partial images can be loaded, too.
- Some extended options have been added to the drive operation progress windows. They can be altered on-the-fly
- File types can be searched for on the Known File Types dialog box
R-Studio Technician:
- A new license type T80+. R-Studio T80+ is equal in its features to full-fledged R-Studio Technician, runs for a certain period of time, and during its validity period can be upgraded to R-Studio Technician for the initial price difference. The license price of 1 USD per day is very affordable for small businesses, computer repair shops, and individual data recovery contractors.
- R-Studio Technician is now available on our public web pages and can be tested in the Demo mode.
- Native support for data recovery hardware from DeepSpar: USB Stabilizer and RapidSpar. Such support allows the user of R-Studio to control hardware parameters directly from the R-Studio interface and create drive's sector maps to improve multiple data recovery operations.
- Runtime imaging. R-Studio creates drive images in parallel with other drive reading operations. Next time when R-Studio accesses data from imaged drive areas it gets the data from the runtime image.
- Multi-pass imaging. Images from problematic drives can be created through several phases reading data from good areas first and from bad and slow areas later. Such approach allows for extracting maximum possible amount of data even from quite faulty drives
- Support for sector maps, both in the R-Studio's format and in the third-party software ddrescue and HDDSuperClone formats
- I/O Monitor allows the user to inspect read/write operations in real time
Improved:
- Support for macOS file vault has been improved
- Symlink processing has been improved, including the Mark all and Unmark all commands
- Execution of the Save All File Names / Load File Names commands has been accelerated
- File type icons have been added to the Find Results (Find All Files) panel
- Message display in the Log View panels has been improved
- Recheck Recovery Chances has been improved
- A warning message appears when the user tries to close tabs with open disks/partitions
- The recovered part of a file will remain when the recovery process has been interrupted
Fixed:
- R-Studio may freeze when opening a RAID created from disk images
- The Logical Sector Size parameters may have appeared twice on the IDE Properties tab
- R-Studio may have frozen when creating an image of a recognized partition
- Files didn't appear in the Find Results panel after they were unmasked if file sorting tabs were switched
- R-Studio may not have found a file by its exact size
- FAT cross-linked folders may have been processed incorrectly
- Zero-sized files could be viewed in the built-in Text/Hexadecimal Editor and file previewer
- The FAT32 bitlocker to go couldn't be recognized
- A disk letter for a bitlocker volume didn't change when the disk letter for its partition was changed
- An image file from a remote computer could not be saved to either the remote computer or local one
R-Studio 8.17 build 180955
- Change log not available for this version
R-Studio 8.16 build 180499
New Features:
- Several file systems (the main and several reformatted ones) can now be found on one partition, if their traces remain in the boot records
Improvements:
- APFS file systems and APFS Fusion Drives can be recognized on a pure hard drive without protective GPT partitions
- The program checks that it works with the USB Stabilizer
Fixed:
- The program may have gone into a loop and frozen at the last stage of partition recognition
- The program may sometimes have frozen when recognizing the file system
- When a partition without a file system on a MBR disk was formatted, the partition divided into a not-equal volume and partition. The were shown as two different objects
- When R-Studio found a direct volume on a flash drive, it didn't search for deleted partitions
R-Studio 8.15 build 180125
- Change log not available for this version
R-Studio 8.15 build 180091
- Change log not available for this version
R-Studio 8.15 build 180015
New features:
- Virtual objects, like virtual RAIDs and regions, can be connected to the system as read-only virtual drives. Such drives are visible in and accessible to the system and other programs. (Technician version)
- Folders, which are symbolic links to other folders (targets), can be shown as links, without showing the content of the targets. (Technician version)
- Support for deduplication in the NTFS file system created by Windows Server 2019 has been added.
- Support for the ReFS file system created by Windows Server 2019, including deduplication, has been added
- R-Studio Emergency can now run in 64-bit mode and use all available RAM to recover large hard drives
Improvements:
- Recognition of NTFS file systems with some wiped parts has been improved
- Icons have been redesigned for better resizing on HiDPI screens
- Recognition of fat16/32 folders with small numbers (1-2) of files has been improved
- Recognition of ext2/3/4 partitions with block sizes <=1024 bytes has been improved
- Folder links comparison has been added for recognized ext2/3/4 file systems to improve the recognition of very small file systems (1 group/cylinder block) and the quality of recognized partitions
Bug-fixes:
- The program may have frozen during the opening or scan of some images
- The warning that a mask was applied my have not shown on tab titles
- NTFS file systems with the cluster size of 64k may have been processed incorrectly
- Scan info for objects found during the fast scan for lost partitions may have been saved/loaded incorrectly (incorrect parent objects)
R-Studio 8.14 build 179693
Fixed:
- R-Studio may have sometimes failed to find NTFS partitions without boot records
- File previewer didn't correctly display filenames with right to left scripts
- Sometimes it was hard to distinguish between font and highlight colors
R-Studio 8.14 build 179675
- Change log not available for this version
R-Studio 8.14 build 179623
- Change log not available for this version
R-Studio 8.14 build 179611
New features:
- Fast search for lost partitions has been added.
- Support for the ISO9660 file system used in CDs/DVDs/ISO images has been added.
- Support for the UStar/Tar/CPIO/Pax file systems used in tape storage devices has been added (Technician version).
Improvements:
- Extended control over file preview has been added. Files can now be marked for recovery, recovered, etc., directly from the built-in File previewer.
- Extended control and display of scanned and unscanned disk areas has been added.
- A special mark has been added for a folder with marked files that are hidden by the applied mask.
- A complete overhaul of symbolic and other links processing has been made.
- An option to recover only marked files matching the applied file mask or all marked files has been added to the Recover dialog box.
- The algorithm that estimates chances for successful file recovery has been improved.
- Interface localizations have been improved.
Bug-fixes:
- R-Studio parsed only the GPT partition table, even when it was invalid, when both LDM/MBR and LDM/GPT were present on the disk. Fixed.
- The Recover marked command was inactive if marked files were invisible due to the applied file mask. Fixed.
- The Copy information command copied the information from the previous file when the information of the selected file didn't exist. Fixed.
- The Expand All command for the folder tree may have frozen on partitions with large numbers of folders. Fixed.
- The number of marked files may have been displayed incorrectly when the view was changed from Real, by Extension, by Time, etc. Fixed.
- Sometimes R-Studio may have crashed during file recovery. Fixed.
- Sometimes the built-in previewer may have frozen when showing damaged files. Fixed.
- Scan time and progress may have been displayed incorrectly while scanning several regions. Fixed.
- Disk scan may have crashed or frozen during the process and an attempt to stop it. Fixed.
- The Rescan the entire disk command may have failed for an already scanned disk. Fixed.
- The Scan dialog didn't size units when it was closed and then opened again. Fixed.
A lot of symlink processing bugs have been fixed, two being worst:
- If there was a symlink to another folder in a place to store recovered files, and there was a folder in the data for recovery which name coincided with that symlink's folder, the recovered data was written to the symlink's folder. That may have resulted in complete loss of files stored in the symlink's folder. Fixed. Now R-Studio saves recovered files only within the path(s) specified for storing recovered files.
- When files were marked and then umarked in a folder that was a symlink, the files in its target were unmarked, too. Fixed.
- Disс information wasn't renewed when the CD was ejected and the Refresh command was executed. Fixed.
- R-Studio tried to access an attached CD/DVD drive during device refresh which may have resulted in temporal freeze. Fixed. Now R-Studio accesses a CD/DVD drive only when it works with it. Fixed.
- Disk size wasn't shown for a CD/DVD disc under WIndows NT. Fixed.
- R-Studio may have temporally frozen while switching between the Real, Extension, XXX Time views for partitions with many folders. Fixed.
- Many internal bugfixes to improve program's efficiency.
- Hexadecimal editor may have frozen while opening a multi-volume image. Fixed.
R-Studio 8.14 build 179597
New features:
- Fast search for lost partitions has been added
- Support for the ISO9660 file system used in CDs/DVDs/ISO images has been added
- Support for the UStar/Tar/CPIO/Pax file systems used in tape storage devices has been added (Technician version)
Improvements:
- Extended control over file preview has been added. Files can now be marked for recovery, recovered, etc., directly from the built-in File previewer
- Extended control and display of scanned and unscanned disk areas has been added
- A special mark has been added for a folder with marked files that are hidden by the applied mask
- A complete overhaul of symbolic and other links processing has been made
- An option to recover only marked files matching the applied file mask or all marked files has been added to the Recover dialog box
- The algorithm that estimates chances for successful file recovery has been improved
Bug-fixed:
- R-Studio parsed only the GPT partition table, even when it was invalid, when both LDM/MBR and LDM/GPT were present on the disk. Fixed
- The Recover marked command was inactive if marked files were invisible due to the applied file mask. Fixed
- The Copy information command copied the information from the previous file when the information of the selected file didn't exist. Fixed
- The Expand All command for the folder tree may have frozen on partitions with large numbers of folders. Fixed
- The number of marked files may have been displayed incorrectly when the view was changed from Real, by Extension, by Time, etc. Fixed
- Sometimes R-Studio may have crashed during file recovery. Fixed
- Sometimes the built-in previewer may have frozen when showing damaged files. Fixed
- Scan time and progress may have been displayed incorrectly while scanning several regions. Fixed
- Disk scan may have crashed or frozen during the process and an attempt to stop it. Fixed
- The Rescan the entire disk command may have failed for an already scanned disk. Fixed
- The Scan dialog didn't size units when it was closed and then opened again. Fixed
A lot of symlink processing bugs have been fixed, two being worst:
- If there was a symlink to another folder in a place to store recovered files, and there was a folder in the data for recovery which name coincided with that symlink's folder, the recovered data was written to the symlink's folder. That may have resulted in complete loss of files stored in the symlink's folder. Fixed. Now R-Studio saves recovered files only within the path(s) specified for storing recovered files.
- When files were marked and then umarked in a folder that was a symlink, the files in its target were unmarked, too. Fixed.
- Disс information wasn't renewed when the CD was ejected and the Refresh command was executed. Fixed.
- R-Studio tried to access an attached CD/DVD drive during device refresh which may have resulted in temporal freeze. Fixed. Now R-Studio accesses a CD/DVD drive only when it works with it. Fixed.
- Disk size wasn't shown for a CD/DVD disc under WIndows NT. Fixed.
- Hexadecimal editor may have frozen while opening a multi-volume image. Top
R-Studio 8.13 build 176095
- Change log not available for this version
R-Studio 8.13 build 176093
- Change log not available for this version
R-Studio 8.13 build 176051
- Change log not available for this version
R-Studio 8.13 build 176037
New features:
- Deleted partitions can be instantly found, without long scan
- Files can be recovered or marked for recovery directly from File previewer
- The number of read tries for bad sectors can be changed during a disk operation
Improvements:
- DeepSpar Disk Imager sector status data is also used to estimate the chances of successful file recovery
- FAT folders partially damaged within sectors are also enumerated
Bugfixes:
- No messages appeared in the log when a scan process was interrupted
- When R-Studio accessed data inside an already opened part of a multi-part image, a request to open this part may have appeared
- A multi-part image may have been opened incorrectly if the parts were small
- Log information may have been incorrect when recovery was interrupted
- When opening the next in turn part of a multi-part image, it was possible to click the OK button without entering the required file name. The part was lost and no more inquires were issued.
- Sometimes the program may have sent a wrong message about not enough space when the image was written to alternative paths
- The Advanced Scan dialog box may have been shown incorrectly
- R-Studio may have frozen or crashed while opening file systems
- The best copy of the FAT table for FAT12/16 file systems was determined incorrectly when it was determined sector-wise
- The path dialog box on the remote computer may have delayed for a long time if there were unaccessible connected network drives
- R-Studio may have found waste copies of GPT partitions if a GPT disk was reformatted to an LDM/MBR disk
- The program may have found some garbage GPT partition entries when those entries were re-written. Fixed. Now R-Studio checks their validity and cancels invalid r
- Partitions could not be copied to an HDD with several partition tables (i.g., a GPT table and some deleted ones)
- An extended debug file system snapshot could not be saved for disks with unsupported encryption methods
Text/hexadecimal editor:
- The offset field in the GoTo dialog box may have been shown incorrectly. Fixed.
- Strings may have been truncated on the Find Results panel. Fixed.
R-Studio 8.12 build 175721
New features:
- Support for the compression algorithms lzvn and lzfse has been added. They are used in the new HFS+/APFS versions.
Bugfixes:
- R-Studio may have crashed when creating an ext4 FS metadata image. Or it may have created it slowly. Fixed.
- R-Studio may sometimes have crashed when opening heavily corrupted file systems. Fixed.
R-Studio 8.12 build 175573
- Change log not available for this version
R-Studio 8.12 build 175481
New Features:
- Support for the APFS file system created by macOS Catalina has been added
- Support of the APFS Fusion Drive has been added
- Several paths can be immediately specified for multiple-volume images
Technician version:
- Alternative paths can be specified for places to store recovered files and images
Post Action options have been added for unattended operations:
- Automatic shutdown once lengthy operations have completed: file recovery, disk scan, and disk imaging. When this option is specified, R-Studio checks that all relevant information (scan info, RAID layouts, etc) has been saved and advanced recovery features specified
- Automatic email notification regarding operation success/failure.
Improvements:
- Search for deleted files has been improved for the Ext2/3/4 and UFS1/UFS2 file systems
- File system reconstruction has been improved for APFS partitions
R-Studio 8.11 build 175479
New features:
- Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices
- Updated Windows driver that can mount R-Drive Image type (.rdr) images of hard drives, besides logical disks, as virtual hard drives in the system
Improvements:
- The Open folder when done option has been added to the Recover dialog box
- File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions
- Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions
- Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal
- Network data recovery speed has been increased by several dozen times
Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time
- The path selection dialog box may have frozen if some network drives were connected to the system under a user account
- R-Studio may have crashed during performing recheck recovery chances
- Volume labels may have been detected incorrectly for UFS1 partitions
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted
- When an invalid RAID table was applied, the program didn't throw a warning
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4
- The cursor may have moved incorrectly when editing the RAID table
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly
- The Refresh DDI command may have appeared even when the DDI device was not connected
R-Studio 8.11 build 175357
New features:
- Automatic recognition and assembly of complex disk manager objects whose components are also various disk manager objects. This may be useful for data recovery from various NAS devices.
- Updated Windows driver that can mount R-Drive Image type (.rdr) images of hard drives, besides logical disks, as virtual hard drives in the system.
Improvements:
- The Open folder when done option has been added to the Recover dialog box.
- File enumeration speed has been increased by several dozen times for Ext2/3/4 and UFS1/UFS2 partitions.
- Folder scan to improve folder tree reconstruction on recognized Ext2/3/4 and UFS1/UFS2 partitions.
- Ext4fs extent reconstruction for large deleted files even if they are not in the file system journal.
- Network data recovery speed has been increased by several dozen times.
Bug-fixes:
- R-Studio may have opened some partitions with large numbers of files for a long time. Fixed.
- The path selection dialog box may have frozen if some network drives were connected to the system under a user account. Fixed.
- R-Studio may have crashed during performing recheck recovery chances. Fixed.
- Volume labels may have been detected incorrectly for UFS1 partitions. Fixed.
- Idle RAID sequences may have appeared when a custom RAID was created. Those sequences could not be deleted. Fixed.
- When an invalid RAID table was applied, the program didn't throw a warning. Fixed.
- An incorrect minimum number of RAID table lines may have appeared for RAID0 and RAID4. Fixed.
- The cursor may have moved incorrectly when editing the RAID table. Fixed.
- Unit fields (TB, GB, MB) in the RAID editor may have worked incorrectly. Fixed.
- The Refresh DDI command may have appeared even when the DDI device was not connected. Fixed.
R-Studio 8.11 Build 175351
- Change log not available for this version
R-Studio 8.10 Build 173987
Improvements:
- LVM processing has been improved
Bugfixes:
- Empty sequences were generated in the Sequences window when the Custom RAID type was selected. Those sequences could not be deleted
- The last valid RAID block order table was saved rather than the current invalid table
- The Get Info window showed wrong file info when sorting had been changed
- Clicking an empty space on the Get Info window opened Hexadecimal editor
- Files remained marked when files were recovered with the Do not recover duplicate files from Extra Found Files option enabled
- Not all information on Overlapping files and Regions when saving file names
- The Find/Mark dialog box didn't preserve selections for the Look At Files/Folders option
- A file and folder may have the same ID on the time/extension sorting tabs. Clicking such object may have resulted in jumping to another object with the same ID. For example, to a file with an ID randomly coinciding with the ID of a folder
- Saving file names for marked files didn't save names for files with links in their paths. Only link name was saved without files in the related folder
- Some small interface and cosmetic bugs have been fixed
R-Studio 8.10 Build 173981
- Change log not available for this version
R-Studio 8.10 Build 173857
- Change log not available for this version
R-Studio 8.9 Build 173593
Bug-fixes:
- The program may have crashed when parsing damaged xattr on the UFS2 file system
- Some small internal bugfixes
R-Studio 8.9 Build 173589
New features:
- Estimation of chances for successful file recovery
- Recovery of names and paths for files deleted to Recycle Bin and Trash
- Support for ReFS 3.4 file system
Improvements:
- A complete redesign of the Find/Mark dialog box.
- The parsing and reconstruction of the FAT32 and NTFS file systems has been improved.
- The parsing of scanned APFS partitions has been improved, especially for large APFS file systems, for which the decrease of parsing time may reach several thousand times.
Bug-fixes:
- Large ext4 file systems (60+TB) may have been processed incorrectly. Fixed.
- Sometimes the program may have crashed or frozen during file enumeration and disk scan. Fixed.
- The program may have written data to network drives incorrectly. Fixed.
- Sometimes file systems on automatically created virtual RAIDs may have been created incorrectly when the RAID parents were disk images. Fixed.
更新時間：2023-08-21
更新細節：