軟體下載 The Dude 7.12

• 1

  版本確認

• 2

  檔案準備中

• 3

  檔案下載

What's new in this version:

- ethernet - changed "advertise" and "speed" arguments, and removed "half-duplex" setting under "/interface ethernet" menu
- health - removed "temperature" health entry from boards, where it was the same as "sfp-temperature"
- sfp - convert configuration to support new link modes for SFP and QSFP type of interfaces
- api - fixed fetching objects with warning option from REST API
- bfd - fixed sessions when setting VRF
- bfd - improved system stability
- bgp - fixed "atomic-aggregate" always set in output
- bgp - fixed "input.filter-chain" argument selection in VPN configuration
- bgp - fixed local and remote port settings for BGP connections
- bgp - fixed typos and missing spaces in log messages
- bgp - implemented IGP metric sending in BGP messages
- bgp - improved logging
- bgp - increase "hold-time" limit to 65000
- bluetooth - added basic support for connecting to BLE peripheral devices
- bluetooth - use "g" units when decoding MikroTik beacon acceleration on peripheral devices menu
- bridge - fixed fast-path forwarding with HW offloaded vlan-filtering (introduced in v7.11)
- bridge - fixed untagged VLAN entry disable
- bridge - fixed vlan-filtering stability with HW and non-HW offloaded ports (introduced in v7.10)
- bridge - improved system stability
- bridge - improved vlan-filtering bridge stability with CAPsMAN (introduced in v7.11)
- bth - added "Back To Home" VPN service for ARM, ARM64, and TILE devices
- calea - improved system stability when trying to add rules without the CALEA package
- certificate - allow to get and maintain Let's Encrypt certificate in IPv6 environment
- certificate - allow to remove issued certificates when CRL is not used
- certificate - fixed "subject-alt-name" duplicating itself when SCEP is used
- certificate - fixed certificate auto renewal via SCEP
- certificate - improved certificate validation logging error messages
- certificate - log CRL HTTP errors under the "error" logging topic
- chr - iavf updated driver to 4.9.1 version
- chr - increased OVA default RAM amount from 160MB to 256MB
- console - added ":jobname" command
- console - added "as-string" and "as-string-value" properties for "get" command
- console - added "terminal/ask" command
- console - added "transform" property for ":convert" command
- console - display "End-User License Agreement" prompt after configuration reset
- console - export required properties with default values
- console - fixed scheduler "on-event" script highlighting when editing
- console - improved ":totime" and ":tonum" commands and added ":tonsec" command for time value manipulation
- console - improved multi-argument property parsing into array
- console - improved randomness for ":rndstr" and ":rndnum" commands
- console - improved stability and responsiveness
- console - improved stability when editing long scripts
- console - improved stability when using "special-login"
- console - improved system stability through RoMON session
- console - improved system stability when using autocomplete
- console - improved system stability
- console - restrict permissions to "read,write,reboot,ftp,romon,test" for scripts executed by DHCP, Hotspot, PPP and Traffic-Monitor services
- console - show full date and time in scheduler "next-run" property
- dhcp - fixed DHCP server and relay related response delays
- email - rename "address" property to "server"
- ethernet - added "supported" and "sfp-supported" values for "monitor" command
- firewall - added "ein-snat" and "ein-dnat" connection NAT state matchers for filter and mangle rules
- flash - show more accurate "total-hdd-space" resource property
- gps - expose GPS port for Quectel EM12-G (vendor-id="0x2c7c", device-id="0x0512")
- ike1 - fixed invalid key length on phase1 negotiation
- ike1 - log an error when non-RSA keys are being used
- ike2 - improved rekey collision handling
- interface - added "macvlan" interface support
- iot - fixed an issue where applying a script to GPIO pin caused GPIO to stop working
- iot - fixed behavior where GPIO output state would change on boot
- ipsec - fixed Diffie-Hellman public value encoding size
- ipsec - fixed IPSec policy when using modp3072
- ipsec - fixed minor typo in logs
- ipsec - reduce disk writes when started without active configuration
- ipv6 - fixed IPv6 RA delay time from 5s to 500ms according to RFC
- ipv6 - send RA and RA deprecate messages out three times instead of just once
- l3hw - fixed IPv6 route suppression
- l3hw - improved system stability during IPv6 route offloading
- l3hw - prioritize local IP addresses over the respective /32 and /128 routes
- led - fixed "interface-status" configuration for virtual interfaces
- led - fixed 5G modem mobile network category LED colours
- leds - added "dark-mode" functionality for RBwAPG-5HacD2HnD
- leds - added "wireless-status" and "wireless-signal-strength" configuration types for wifiwave2 interfaces
- log - improved logging for user actions
- lora - added LNS protocol support
- lte - added at-chat support and increased wait time on modem at-chat for Dell DW5821e, DW5821e-eSIM, DW5829e and DW5829e-eSIM
- lte - added SINR reporting for FG621-EA modem
- lte - changed R11e-LTE ARP behavior to NoArp
- lte - fixed 5G data-class reporting for Chateau 5G
- lte - fixed APN authentification in multi APN setup for R11e-LTE6
- lte - fixed FG621-EA possible timeouts during firmware upgrade
- lte - fixed IPv6 prefix for MBIM modems in multi-apn setup when IPv6 APN used as not first APN
- lte - fixed RSSI for FG621-EA modem to show the correct value
- lte - fixed Sierra modem detection for modems with vendor-specific USB descriptors
- lte - fixed Sierra modem initialization
- lte - fixed startup race condition when SIM card is in "up" slot for LtAP mini
- lte - fixed sub-interface auto-removal in multiple APN setups
- lte - show correct data class when connected to 5G SA network
- lte - use more compact logging messages
- modbus - added additional security settings for Modbus TCP
- mpls - added option to match and set MPLS EXP with bridge and mangle rules
- mpls - fixed "propagate-ttl=no" setting
- mpls - improved FastPath next-hop selection hash algorithm
- mqtt - added on-message feature for subscribed topics
- mqtt - added parallel-scripts-limit parameter to set maximum allowed number of scripts executed at the same time
- mqtt - added wildcard topic subscription support
- netinstall - added option to discard branding package
- netinstall - display package filename in GUI Description column if package description is not specified
- netinstall-cli - added empty configuration option "-e"
- netinstall-cli - added option to discard branding package
- netinstall-cli - allow ".rsc" script filenames
- netinstall-cli - prioritise interface option over address option
- netinstall-cli - updated configuration option description
- netwatch - decreased "thr-tcp-conn-time" maximum limit to 30 seconds
- ospf - fixed adding ECMP routes
- ospf - fixed BFD on virtual-link with configured VRF
- ospf - fixed OSPFv3 authentication header length calculation
- ospf - fixed OSPFv3 not working with NSSA areas
- ospf - fixed parsing of opaque LSAs used by TE
- ospf - fixed translated NSSA routes not showing in backbone
- ovpn - added "tls-auth" option support for imported .ovpn profiles
- ovpn - improved system stability
- pimsm - fixed BSR update process
- pimsm - fixed UIB update process
- pimsm - improved system stability
- poe-out - driver optimization for AF/AT controlled boards
- poe-out - fixed rare CRS328 poe-out menu and poe-out port config loss after reboot
- poe-out - improved "auto" mode for devices with single PoE-out port
- poe-out - removed "auto" mode support for L009 devices
- port - add support for Huawei MS237h-517
- port - expose NMEA/DIAG ports for Dell DW5821e and DW5821e-eSIM
- qsfp - added 50Gbps rate support for QSFP28 interfaces
- qsfp - fixed incorrect QSFP temperature readings in negative temperature
- qsfp - improved auto link detection for AOC cables
- qsfp - use sub-interface configuration for establishing link (for 40Gbps and 100Gbps links, all sub-interfaces must be enabled)
- quickset - fixed "LAN" interface list members if configuration does not contain bridge
- rip - added BFD support
- rip - fixed session not working in VRF
- route - added "single-process" configuration setting, enabled by default on devices with 64MB or less RAM memory
- route - added "suppress-hw-offload" setting for IPv6 routes
- route - fixed gateway after link restart
- route - removed deprecated "received-from" property
- route - reverse community "delete" and "filter" command behavior
- routerboard - added "reset-button" support for RB800, RB1100 and RB1100AHx2 devices
- routerboard - fixed "reset-button" support for wAP ac and wAP R ac devices
- sfp - added 5Gbps rate for SFP+ interface on 98DX224S, 98DX226S, and 98DX3236 switch chips
- sfp - fixed missing "rx-power" monitor with certain modules (introduced in v7.10)
- sfp - fixed occasional bad EEPROM data reading for L009 devices
- sfp - improved interface stability for SFP and QSFP types of interfaces
- sfp - improved system stability with certain modules for 98DX224S, 98DX226S, 98DX3236, 98DX8216 and 98DX8208 switch chips
- snmp - changed "mtxrGaugeValue" type to integer
- ssh - added support for user ed25519 public keys
- ssh - allow to specify key owner on import
- ssh - fixed SSH tunnel performance (introduced in v7.10)
- ssh - improved connection stability when pasting large chunks of text into console
- supout - added interface list members section
- supout - added LLDP power to supout.rif
- supout - fixed BFD section
- switch - improved resource allocation for 98DX224S, 98DX226S, and 98DX3236 switch chips
- switch - improved switch chip stability for CCR2004-16g-2s+ devices
- system - fixed process multithreading (introduced in v7.9)
- system - improved system stability during booting for L009 devices
- system - improved system stability when MD5 checksums are used
- tftp - fixed empty file name matching
- tile - improved system stability when using queues
- traffic-generator - added "priority" property for "inject" command
- traffic-generator - fixed traffic-generator on CHR and x86
- usb - added support for RTL8153 USB ethernet on ARM, ARM64 and x86
- vrf - limit maximum VRFs to 1024
- vxlan - improved system stability for Tile devices
- webfig - fixed "Days" property configuration change under "IP/Firewall" menu
- webfig - fixed timezone for interface "Last Link Down/Up Time"
- webfig - improved Webfig performance and responsiveness
- webfig - try to re-establish connection after disconnect
- wifiwave2 - added an alternative QoS priority assignment mechanism based on IP DSCP
- wifiwave2 - added comment property for registration-table
- wifiwave2 - added station-bridge interface mode
- wifiwave2 - correctly add interface to specified "datapath.interface-list"
- wifiwave2 - do not show default "l2mtu" on compact export
- wifiwave2 - enable changing interface MTU and L2MTU
- wifiwave2 - fixed malformed Interworking packet elements
- wifiwave2 - fixed PTK renewal for interfaces in station mode
- wifiwave2 - fixed re-connection failures for 802.11ax interfaces in station mode
- wifiwave2 - fixed sniffer command not receiving any QoS null function frames when using 802.11ax radios
- wifiwave2 - fixed untagged VLAN 1 entry when using "vlan-id" setting together with vlan-filtering bridge
- wifiwave2 - fixed warning on CAP devices when radar detected
- wifiwave2 - implemented an option to transmit IP multicast packets as unicasts
- wifiwave2 - improved compliance with regulatory requirements
- wifiwave2 - limit L2MTU to 1560 until a fix is available for a bug causing interfaces to fail transmitting larger frames than that
- wifiwave2 - list APs with a higher maximum data rate as more preferable roaming candidates
- wifiwave2 - log more information regarding authentication failures
- wifiwave2 - make 4-way handshake procedure more robust when acting as supplicant (client)
- wifiwave2 - use CAPsMAN's "datapath.vlan-id" on CAP for bridge port "pvid"
- winbox - added "Addresses" property under "Routing/BFD/Configuration" menu
- winbox - added "BUS" property for USB Power Reset button for LtAP-2HnD and CCR1072
- winbox - added "Comment" under "Routing/BFD/Configuration" menu
- winbox - added "g" flag under "IPv6/Routes" menu
- winbox - added "Host Key Type" setting under "IP/SSH" menu
- winbox - added "Key Owner" setting under "System/User/SSH Keys" and "System/User/SSH Private Keys" menus
- winbox - added "Name Format" property under "WifiWave2/Provisioning" menu
- winbox - added "Remote Min Tx" parameter under "Routing/BFD/Session" menu
- winbox - added "Startup Delay" setting under "Tools/Netwatch" menu
- winbox - added "USB" button under "System/RouterBOARD" menu for LtAP-2HnD
- winbox - added "Use BFD" setting under "Routing/RIP/Interface-Template" menu
- winbox - added Enable/Disable button under "Routing/RIP/Static Neighbors" menu
- winbox - added missing properties under "WifiWave2" menu
- winbox - added MQTT subscription menu
- winbox - allow to change port numbers for SCTP, DCCP, and UDP-LITE protocols under "IP/Firewall" menus
- winbox - allow to set multiple addresses and added IPv6 support under "Interface/VETH" menu
- winbox - allow to specify server as DNS name under "Tools/Email" menu
- winbox - changed "MBR Partition Table" checkbox to unchecked by default under "System/Disks/Format-Drive" menu
- winbox - do not show "F" flag for disabled entries under "IP/Routes" menu
- winbox - fixed "Address" property under "WifiWave2/Remote-CAP" menu
- winbox - fixed "Do" property under "Routing/Filters/Select Rule" menu
- winbox - fixed "Group Key Update" maximum value under "WifiWave2/Security" menu
- winbox - fixed "Range" property under "Routing/Filters/Num Set" menu
- winbox - fixed "Switch" menu for CCR2004-16G-2S+
- winbox - fixed entry numbering and ordering under "WifiWave2/Provisioning" menu
- winbox - fixed minor typos
- winbox - improved support for certain properties under "WifiWave2/Interworking Profiles" menu
- winbox - rename "DSCP" setting to "DSCP (+ECN)" under "Tools/Traffic-Generator/Packet-Templates" menu
- winbox - rename "Name" setting to "List" under "IP,IPv6/Firewall/Address-List" menu
- winbox - rename "Password" button to "Change Now" under "System/Password" menu
- winbox - show "unknown" value for "FS" property under "System/Disks" menu if the data is not available
- wireguard - added "auto" and "none" parameter for "private-key" and "presharde-key" parameters
- wireguard - added "wg-export" and "wg-import" functionality (CLI only)
- wireguard - allow to specify client settings under peer menu which will be included in configuration file and QR code
- wireguard - request public or private key to be specified in order to create peer
- wireless - added more "radius-mac-format" options (CLI only)
- wireless - fixed malformed Interworking packet elements
- www - fixed allowed address setting for REST API users
- www - fixed fragmented POST data for SCEP service
- x86 - added support for Mellanox ConnectX-6 Dx NIC
- x86 - i40e updated driver to 2.23.17 version
- x86 - igb updated driver to 5.14.16 version
- x86 - igbvf updated driver from in-tree Linux kernel
- x86 - igc updated driver to 5.10.194 version
- x86 - ixgbe updated driver to 5.19.6 version
- x86 - Realtek r8169 updated driver
- x86 - updated latest available pci.ids