Hard Disk Sentinel 歷史版本列表
更新時間：2022-03-15
更新細節：
What's new in this version:
- Monitor, diagnose, repair hard disks, SSDs, SSHDs (hybrid drives), NVMe SSDs, RAID arrays and external RAID boxes, industrial (micro) SD cards, NAS drives, pendrives to avoid disk failure and data loss. Featuring Quick Fix, Device Specific Information and Extended S.M.A.R.T. functions.
更新時間：2022-03-10
更新細節：
What's new in this version:
Improvements and new features:
- New function: Disk menu -> Surface test -> Quick Fix (targeted repair of problematic sectors)
- Verify which area(s) of the disk drive reported problems and written recently then diagnose, repair specifically those (and nearby) sectors and critical system areas. The test forces the disk drive to repair any problematic (pending, weak) sectors: restore the status to good or reallocate (replace from spare area) if required to prevent further use of the original sector (Pro version only)
New function for advanced users (PRO version only): Disk menu -> Device Specific Information to detect and display additional details including:
- Power on time when last error detected/logged by the hard disk/SSD (registered version only)
- Time since last error detected/logged by the hard disk/SSD (registered version only)
- Sector(s) where errors happened previously and their location by block number on the disk surface map (registered version only)
- ATA error log: last known errors, their description, registers, error details, last commands before error
- ATA self test log: last disk self tests, self test results and details (registered version only)
- ATA drive statistics: lifetime details, errors, temperature statistics
- ATA drive statistics: rotating media statistics (hard disk drives) or solid state device statistics (SSDs)
- ATA drive disk utilization and absolute limits for amount of reads/writes and temperature limits (if defined by the manufacturer)
- ATA drive temperature statistics, last known recorded temperature values
- ATA drive additional features and functionality supported by the hard disk drive/SSD
- NVMe error log
- NVMe self test log: last disk self tests, test results and possible error details (registered version only)
- SCSI/SAS defect list information
- SCSI/SAS background scan status information, protocol specific port information
- Device Specific Information recorded and can be re-loaded to review previous statistics
- Device Specific Information automatically shows the changes of most important values compared to previous data (registered version only)
- Extended S.M.A.R.T. detection: detect additional details / information for more accurate status/health reporting by detection of Ext. S.M.A.R.T. attributes
Added option to perform hardware self test on NVMe SSDs (if supported):
- Disk menu -> Short Self Test, Disk menu -> Extended Self Test functions can be used on NVMe SSDs when available.
- The Information page confirms if Device Self Test feature is supported by the SSD.
- NVMe self test is possible with
- Windows Standard NVMe controller driver (may prevent too frequent self tests)
- Intel NVMe controller driver or Intel Volume Management Device NVMe RAID controller driver
- Samsung NVMe controller driver
- Micron NVMe controller driver
- JMicron USB-NVMe adapters/external NVMe-USB enclosures with JMicron chipsets
- Option to schedule short / extended self test on NVMe SSDs too (registered Hard Disk Sentinel Pro version)
- New buttons in the button bar to open Windows Disk Management and Windows Device Manager
- Display Windows Drive Index (Physicaldriveindex) on the Information page if RAID array(s) present
- Display/report NVMe Maximum Power use in mW units on the Information page
- Improved disk surface test performance for NVMe SSDs: much faster Disk menu -> Read test possible on NVMe SSDs (in memoriam Neduddki)
- Improved Disk Repair test: counts and displays the amount of sectors successfully repaired and failed to repair
- Amount of disk status history increased to allow logging and check back additional of historical status/health/temperature statistics
- Improved write disk testing, Disk Contents Inspector and general support of SAS drives with 520 or 528 bytes/sector sizes
Improved hardware support:
- Added support of AMD NVMe RAID solution: detect the status (health, temperature, lifetime writes, complete self-monitoring details) of NVMe M.2 PCIe SSDs managed by AMD RAID (both standalone and RAID configurations)
- Requires AMD RAID driver 9.3.0-00266 or newer version.
- Note: if the detection does not seem working immediately, a reboot / power cycle may be required
- Added support of Adaptec SmartRAID 3102E-8i controller: detect status information about hard disks / SSDs in RAID or standalone configuration
- Added detection of hard disks / SSDs configured as RAID on LSI LIBERATOR (LSI 9750-8i) controller, detect complete disk information / S.M.A.R.T. status of SATA / SAS hard disks / SSDs
- Added support of LSI MegaRAID (MegaSR) / Intel Embedded Server RAID Technology II SATA RAID controller: detect status information of SATA disk drives in RAID configuration (if possible by the driver)
- Added support of Apricorn Fortress L3 and Padlock 3 external hard disk drives and Apricorn ASK3 or ASK3z Secure Key pendrives: in addition to the robust design and security functions the hard disk drives and pendrives supported by Hard Disk Sentinel: complete health, temperature, self-monitoring S.M.A.R.T. status detected and displayed.
- Added support of SSK USB 3.1 / 3.2 Gen 2 (10 Gbps) NVMe adapter: detect NVMe SSD status
- Added support of Kingston XS2000 SSD, Goodram CX400 G2, Zadak SSD
- Improved support of some Acer SSDs, Sandisk SSDs, Lite-on SSDs
- Improved status reporting with FreeCom Public-disk external hard disk drives
- Improved detection with Intel Optane configurations
- Improved compatibility with Intel VROC NVMe SSD RAID
- Improved health detection and reporting of various Sandisk and Crucial SSDs
- Added support of Kingston Design-In SSDs (OMSP0S3, OM4P0S3, OM8P0S3, OCP0S3)
- Improved compatibility and disk status reporting with Orico NS500RU3 3.5 inch 5 Bay USB 3.0 Hard Drive Enclosure
- Improved health/status reporting for PNY SATA SSDs
- Improved display of power on time, health, status of newer WD / Hitachi SAS hard disk drives
- Improved compatibility with LSI controller with multiple arrays and higher number of hard disks / SSDs configured
- Improved compatibility with Promise Supertrak 8350 SATA RAID controller
- Improved compatibility with older SD/micro SD card readers
- Improved compatibility with some Kingston, Toshiba, Micron SSDs
- Improved text description of NVMe SSDs upon different problems / error conditions
- Adjusted calculation and reporting lower health on failing / problematic NVMe SSDs
- Improved detection with ASMEDIA ASM236x series USB-NVMe adapters
- Improved detection with Adaptec / Microsemi SAS RAID controllers and HBAs
- Improved detection with LSI / IBM / Intel SAS RAID controllers, improved dedicated hot spare reporting
- Improved support of Seagate Firecuda drives
- Improved support of Crucial CT2000MX500SSD1 SSD, Patriot P200 SSD, Micron SSDs, WDC PC SA530 SSDs
- Improved power on time display for SAS hard disk drives, SAS SSDs
- Improved display of stored file at a sector during disk surface test
- Improved Disk menu -> Surface test -> Disk Repair test
- Improved support of Sandisk X600 SSDs, Transcend SSDs, MemKing SSDs
- Improved compatibility and detection with LSI/Avago/Broadcom 9400 series SAS HBA
- Improved support of HP SATA/SAS HBA controllers
- Improved support of some Micron SATA SSDs, Plextor SATA SSDs, Kingston SATA SSDs
- Improved disk surface test performance log
- Added support of DELL SD1-U0250 SSD, YGC-SA3-128G SSD, Netac SSD, Sandisk SD8SBBU480G1122,
- Added support of ProGrade PG05.5 CFExpress memory card reader
- Added support of Crucial X6 SSD: detect temperature, self-monitoring status, health, S.M.A.R.T. details
- Added support of Patriot Supersonic Rage Prime pendrive: detect temperature, self-monitoring status, health, S.M.A.R.T. details
- Added support of Team Group TC21231TBB01 pendrive: detect temperature, self-monitoring status, health, S.M.A.R.T. details
- Added support of Swissbit U-50n, U-56n series industrial pendrives: detect temperature, self-monitoring status, health, and extended S.M.A.R.T. data
- Improved support/compatibility with Intel SSDPE2MD400G4
- Added/improved support of some HIKVISION SSDs
- Improved database saving and option to re-load last known status of offline disks
- Improved support of some Micron/Crucial SATA SSDs
- Added support of Kingston SDCIT2 industrial (micro) SD cards
- Added support of i-tec MySafe 2x2.5" USB 3.1 enclosure: detect S.M.A.R.T. status of both drives in RAID0/RAID1/JBOD mode
- Added support of Walram SATA SSD
- Improved detection of RAID / Hot spare drive(s) with older Intel RST drivers
- Improved support of some Kingston, Sandisk, Patriot SSDs
- Improvements for ADATA SD Express cards
- Improvements for AMD RAID with high number of SATA hard disks/SSDs and NVMe SSDs
Bug fixes, further modifications:
- Minor improvements on non-English languages
- Service mode improvements
- Improved WMI functionality support
- Minor changes for Windows 11
更新時間：2021-01-19
更新細節：
What's new in this version:
Improvements and new features:
- added option: Include problem overview in alerts (Configuration -> Message Settings, Pro version only)
- added option: Alert about problematic drive(s) only (Configuration -> Message Settings, Pro version only)
- added links to text descriptions: show links with underline and option to click on them to open in browser automatically
- added support of DELL PERC Software RAID controllers: DELL PERC S100/S300, DELL PERC S110, DELL PERC S130, DELL PERC S140: detect all connected hard disks/SSDs and their health, temperature and status information (configured as RAID or standalone)
- added support of Broadcom 9500 series Tri-mode SAS / SATA / NVMe RAID controllers: detect SATA / SAS / NVMe RAID array members, display complete self-monitoring S.M.A.R.T. status of drives managed by Broadcom 95xx RAID controller, configured as RAID
- added support of WD BLACK AN1500 NVMe SSD: display real health, wearout, lifetime writes, S.M.A.R.T. status of SSDs
- added support of HighPoint 7505 NVMe RAID controller: detect the status information of NVMe SSDs used in standalone and RAID mode
- added support of ROG RAIDR Express PCIe: detect complete status, health, S.M.A.R.T. information
- added support of ORICO 3559U3 5-bay external USB 3.0 hard disk enclosure
- added support of Yottamaster 4-bay and FS5U3 5-bay external USB 3.0 hard disk enclosure
- added support of KIOXIA EXCERIA SATA / NVMe SSDs
- added health display for LITEON ECE Dell-specific SSDs
- added support of Sabrent Rocket 4.0 2TB NVMe SSD
- added support of Crucial CT500P1SSD8 / CT1000P1SSD8, Micron 9300 Max (Micron NVMe driver)
- added support of ATP AF8GUD3-WAAXX, AF16GUD3-WAAXX, AF32GUD3-WAAXX industrial SD cards
- added support of ADATA SE760 external SSD
- added support of RaidSonic Icy Box IB-1817M-C31, RaidSonic ICY BOX IB-1824ML-C31 NVMe-USB adapter
- detect up to 240 hard disk drives/SSDs
- added support of updated Realtek USB-NVMe firmware
- added support of OWC Aura SSD: detect complete status, health, S.M.A.R.T. information
- added support of AXE Memory external SSD
- added support of Bulldozer, AFOX SSDs
Improved hardware support:
- improvements, detection fixes for latest Windows Insider Preview builds
- improved compatibility with Intel Optane configurations
- improved support of Samsung 980 PRO series SSDs
- improved display of lifetime writes with HP RAID configuration
- improved health/status display of ADATA SX8100, XPG Spectrix S40 NVMe SSDs
- improved detection with LSI / Avago / Broadcom / DELL / IBM / Intel SAS RAID controllers
- improved health reporting with Patriot Burst, Silicon Power SSDs
- improved power on time reporting for Toshiba MK2565GSX
- improved compatibility with various ADATA SSDs (650/750/760/800 series)
- improved compatibility with Intel VROC and Micron 2300 NVMe SSDs
- improved detection and status / power on time reporting of WD SAS hard disks
- improved health display and reporting for WD Green / WD Blue series SSDs
- improved support of LSI MegaRAID 9460 tri-mode (NVMe/SAS/SATA) RAID controller
- minor corrections for SK Hynix, Sandisk SSDs, Silicon Power SSDs, XPG SPECTRIX S40, Patriot P210
- improved support of Startech S352BU33RER, ORICO 9548RU3, CFI-B8283ERGG external multi-drive / RAID enclosures
- improved detection and reporting of different Kingspec SSDs, INTEL SSDSC2BF180A5L, Micron 550 SSD
- improved detection and reporting of White Label WL500 hard disks
- improved detection of RAID 10 arrays on Intel RAID controllers
- improved detection of SATA hard disks / SSDs with AMD Bottom RAID controller driver 9.3
- improved detection of SATA hard disks / SSDs with AMD StoreMI 2.0 driver 9.4
- improved detection with AMD RAID controller (scsiport) driver under Windows XP
- improved detection of MaxDigital hard disk drives
- improved power on time display of Hitachi SAS hard disks (HUH721010AL5200)
- improved hard disk status, health, temperature detection with MD4000GBDS hard disks
- improved support of Swissbit industrial M.2 SATA SSD
- improved support of Lenovo WD4001FYYG SAS hard disk
- improved health calculation for NVMe SSDs
- improved and extended detection of Intel VROC SSDs in NVMe SSD RAID configurations with higher number of SSDs
- improved detection of HP Smart Array RAID controllers when multiple arrays configured on same physical disk drives
- improved compatibility with HFS1T9G32FEH SSD, SSDPR-CX400-256 SSD, Silicon Power SSD, Toshiba SSDs
- improved support and lifetime writes display of several LITEON SSDs
- improved compatibility and detection performance with LSI SAS3 HBA
- improved support of 4Kn SATA hard disk drives, showing "4Kn" on the Information page
- display warning upon possible compatibility issue if 4Kn drive used on older system
- improved compatibility with Intel SSDSCKKB240G8R, Intel SSDSC2KB019T7R, THNSF81D92CSE
Bug fixes, further modifications:
- complete German Help available - thanks to Kurt Lettmaier for his work
- fixed: "Unknown" drive may be displayed previously when AMD RAID used
- minor changes, compatibility improvements
- improved progress display during disk surface test
- improved disk activity tray icons: showing logical disk drives too
- improved, fixed save dialogs (Report menu -> Save HTML report, Save TXT report, save temperature statistic images)
- improved Disk Contents Inspector
- MSFT XVDD devices no longer displayed
- improved menu display in high-contrast setting
更新時間：2020-05-05
更新細節：
What's new in this version:
- Improved compatibility with Intel SSDSCKKB240G8R, Intel SSDSC2KB019T7R, THNSF81D92CSE
- Added support of Bulldozer, AFOX SSDs
- MSFT XVDD devices no longer displayed
- Improved menu display in high-contrast setting
- Minor changes, modifications
更新時間：2020-02-12
更新細節：
What's new in this version:
Improvements and new features:
- Added support of LSI / Broadcom 9440 Tri-mode SAS / SATA / NVMe RAID controllers: detect NVMe RAID array members, display complete self-monitoring S.M.A.R.T. status of NVMe M.2 SSDs managed by Broadcom 9440 RAID controller, configured as NVMe RAID (in addition to SATA RAID, SAS RAID)
- Added support of Highpoint RocketRAID 3740: detect complete hard disk drive status about SATA/SAS hard disk drives and SSDs configured as RAID
- Added support of Adaptec SmartRAID 3152-8i Controller: detect complete hard disk drive status about SATA/SAS hard disk drives and SSDs configured as RAID
- Added support of Lenovo 730 series RAID controller: detect hard disk drive status used in RAID configuration
- Detect and report NVMe Namespace Information: total addressable sectors, current sector size, LBA format list (possible sector sizes) with performance
- Added function to reset workload counters for Samsung PM883 / PM863a SSDs
- Added support of KINGSTON SEDC450 series
- Added support of KINGSTON KC600 series
- Added support of Seagate Nytro SSDs, Innovation IT SSDs
- Added support of Realtek RTL9210 NVMe-USB adapters
- Added support of KESU USB hard disk / SSD enclosure, JAYCAR XC4687 USB HDD docking station
- Added support of Raidsonic IB-1817M-C31 USB - NVMe SSD adapter with updated firmware
- Added support of XT-XINTE USB 3.1 Type-C Adapter USB C 10Gbps USB-NVMe adapter
- Added support of SSK USB-NVMe adapter
- Added support of QNAP TR-004 4-bay USB - SATA RAID hard disk enclosure: detect and display status of hard disk drives used in RAID configuration
- Added support of HIKVISION SSDs
- Added support of Kingston RBUS... series SSDs, new Kingspec SSDs
- Added support of WDC PC SA530 SDATB8Y1T00
Improved hardware support:
- Improved support of ASMEDIA ASM2362 USB-NVMe adapter detection and NVMe SSD status reporting
- Improved support of various external USB SSDs
- Improved support of various SAS SSDs, proper support of Sandisk SAS Optimus Eco SSDs
- Improved display of SAS hard disks, SAS SSDs, added further self-monitoring data to the S.M.A.R.T. page of SAS drives
- Improved support and correct health display of WD RED SSDs
- Improved support of Crucial SSDs, Apacer AS340 / Apacer AS350 series SSDs
- Improved detection under Windows XP with AMD chipset
- Improved detection under Windows XP with ARECA RAID controllers
- Improved detection with several Intel chipsets (both RAID and with standalone disk configuration)
- Improved lifetime writes on Micron, Toshiba SSDs
- Improved support of ADATA, Kingspec SATA SSDs
- Improved support of Samsung Enterprise class SSDs
- Improved, extended detection of NVMe SSDs on Intel VROC RAID controller
- Improved, extended detection of MaxCache SSDs on Adaptec SATA/SAS RAID controllers
- Improved, extended detection on Marvell 9230 SATA RAID controller
- Improved compatibility and USB drive status detection with Intel H87 chipset
- Improved support of ADATA SSDs
- Improved support of KINGSTON HyperX Fury 3D SSD support
- Improved reporting of lifetime writes on many SANDISK and LITEON SSDs
- Improved support of Lenovo SSDs
- Improved support of newer Hitachi SAS Helium (He) drives, reporting additional self-monitoring details
- Improved support of Lenovo SSDs: previously health may be 1% only on a new SSD
- Improved support of various Kingspec SSDs
- Improved support of various Zheino SSDs
- Improved support of LSI/DELL SAS/SATA controllers on high number of disks and Cachecade configuration
- Improved support of SK Hynix SC308/SC311 SSDs
- Improved detection and compatibility with AMD RAID integrated controller
- Improved compatibility with DELLBOSS SSD
- Improved compatibility with IcyBox RD3620SU3
- Improved health display for SCSI-NVMe translation
- Improved performance display for eMMC when health drops to 0%
Bug fixes, further modifications:
- Completely updated network engine, using TLS 1.2 protocol when sending e-mails
- Fixed real-time performance display graph on NVMe SSDs
- Improved disk selector on the user inteface, faster redraw/response in case of high number of disk drives
- Improved logical drive and NTFS mount point detection and reporting
- Improved adjustment window of acoustic level, advanced power management on high-DPI
- Improved display of last update date/time for NAS drives
- Completely new Turkish language support - thanks for Atyf Zafrak for the translation
- Fixed bug in HTML report at logical disk free space graph
更新時間：2019-07-11
更新細節：
What's new in this version:
Improvements and new features:
- added support of Intel Virtual RAID on CPU (Intel VROC): detect NVMe RAID array members, complete self-monitoring S.M.A.R.T. status of NVMe M.2 SSDs managed by Intel VROC controller
- added support of HighPoint NVMe RAID controllers: detect NVMe RAID array members, complete self-monitoring S.M.A.R.T. status of NVMe M.2 SSDs managed by HighPoint NVMe RAID controllers
- added support of HighPoint SSD7101A-1 NVMe RAID controller
- added support of Lenovo 530-8I RAID adapter: detect complete S.M.A.R.T. status of SATA/SAS hard disk drives configured as RAID
- added support of ThinkSystem 930-8I 2GB Flash PCIe 12Gb Adapter: detect complete S.M.A.R.T. status of SATA/SAS hard disk drives configured as RAID
- added support of Dell PowerEdge Boot Optimized Storage Solution - BOSS: detect RAID array members, complete self-monitoring S.M.A.R.T. status of SSDs managed by the BOSS RAID controller
- added support for MOBIUS 5-bay RAID hard disk enclosure: detect complete status of SATA hard disks configured as JBOD or RAID
- added support of ICY DOCK MB662U3-2S R1 RAID external enclosure: detect status information about RAID disk members
- added support of Kingston Enterprise SSDs: DC500R and DC500M
- added detection of eMMC storage devices used in tablets: detect and display eMMC specific information and self-monitoring status. Display eMMC health (if supported by the eMMC device)
- added support for Swissbit industrial SD cards, ATP industrial SD cards, Kingston SDCIT industrial SD cards: detect status information, health and statistics
- added support of Minerva RAID R2056A adapter (M.2 B+M notch to SATA 7pin x2 RAID Card)
- added support of various Apacer SATA SSDs
Improved hardware support:
- fixed health display for Western Digital WD BLUE SSDs
- improved support of WD and Hitachi Helium-filled (He) hard disk drives
- completely redesigned HighPoint SATA/SAS RAID controller support: better detection of RAID array configuration, logical/physical disk drives, improved status detection and S.M.A.R.T. reporting with HighPoint SATA/SAS RAID controllers
- added option to start Disk menu -> Short self test, extended self test on disks managed by JMicron external RAID enclosures
- added option to use Disk menu -> Advanced power management, Acoustic Management on disks managed by JMicron external RAID enclosures
- improved support of JMicron external multi-drive enclosures running in port multiplier (non-RAID) mode (drive order and logical drive assignments corrected)
- improved NVMe detection with Intel RST RAID driver and Intel Volume Management Device NVMe RAID Controller driver
- improved support of different Kingston, KingDian SSDs
- improved write-type disk testing with Transcend RDF5 memory card reader
- improved write-type disk testing of SD cards formatted to exFAT
- improved NVMe status detection under Windows 7 when Intel chipset driver 15.7 used for the NVMe SSD
- improved support of multiple HighPoint RAID controllers (SATA only, SATA+SAS, NVMe)
- improved display of lifetime writes on various TOSHIBA SATA SSDs
- improved support of ORICO 2139U3 external enclosures
- improved support of ADATA SU650 SSDs
- improved support of KingSpec SATA SSDs
- improved detection of SATA disk drives on LSI (non-RAID) HBA controllers
- improved ASM1092R RAID controller chip support
- improved power on time display for SAS hard disk HGST H7280A520SUN8.0T
- improved support of eSATA / USB multi-drive hard disk enclosures in port multiplier (non-RAID) mode
- improved compatibility with ICY BOX IB-RD3640SU3
- improved lifetime writes on various Samsung SATA SSDs
- improved health display on Kingston SA400M8120G SSD
- improved Intel NVMe SSD detection
- improved disk detection with LSI RAID controllers when array(s) degraded / disk(s) missing or foreign
Bug fixes, further modifications:
- improved display of lifetime writes on various Samsung SATA SSDs
- improved power on time display for various SCSI/SAS hard disk drives
- overheat tray notification shows affected hard disk drive(s) first
- display message box with the result of e-mail test when all notifications disabled
- updated Russian language support, THANKS for Dmitry Yerokhin for the translation
- updated Spanish language support, THANKS for Skylär Astaröt for the translation
- updated Chinese language support, THANKS Chenxu Wang for the translation
更新時間：2019-03-20
更新細節：
What's new in this version:
Improvements and new features:
- added option to configure offsets for SCSI, SAS hard disk drives/SSDs, NVMe SSDs, industrial SD memory cards
- added watchdog extension: protection against unwanted closing/termination after running for multiple days
- detect and display new problems, degradations of SCSI, SAS disk drives on the Log page
- improved and extended Log page for IDE, SATA, USB drives: display additional problems, degradations
- it is possible to sort disks in Load status of offline disks window, multiple disk test selector window, authentic report selector window
- it is possible to find (CTRL+F, F3) in Load status of offline disks window, multiple disk test selector window, authentic report selector window
Improved hardware support:
- added support of Lenovo 720I SATA/SAS RAID controllers: detect complete status of SATA/SAS hard disks, SSDs managed by such RAID controllers
- added/improved support of HP RAID controllers: Smart Array H240nr, Smart Array P240nr, Smart Array P542D: detect complete status of SATA/SAS hard disks, SSDs managed by such RAID controllers
- added support of HPE P/E-Class SR Gen10 SATA/SAS RAID controllers (tested: HPE Smart Array P408i-a SR Gen10)
- added support of Intel RSP3TD160F SAS RAID controller: detect complete status of SATA/SAS hard disks, SSDs managed by this RAID controller
- completely redesigned and fixed drive order, logical drive detection with Intel, LSI, Dell, IBM RAID controllers
- completely redesigned VIA RAID controller detection: detect and display logical/physical disks better
- completely redesigned JMicron-RAID detection: detect complete disk status, RAID members and their health, temperature, self-monitoring status 10-40 times faster than previously
- added support of Kingston SUV500 series SSDs
- added support of Crucial BX500 series SSDs: display health and status information correctly
- added support for ASMedia ASM236X USB -> NVMe bridge: detect complete NVMe M.2 SSD status over USB connection
- added support of USB-NVMe adapters with JMicron JMS583 chip: detect and display complete NVMe status information
- added support of Jeyi I9, ITHOO Tech USB-NVMe adapter
- added support of UNITEK S1201A USB3.1 Type-C to M.2 (PCIe/NVMe) Enclosure
- added support of Icy Box and Delock External enclosure for M.2 NVMe SSD, USB 3.1 Type-C, Glotrends Scorpio M.2 NVME USB-C External Enclosure
- added support of Corsair Voyager GTX pendrives: display complete self-monitoring status, lifetime writes and details
- added support of Mediasonic K32-SU3 external USB 3.0 - SATA hard disk enclosure
- added support of ICY BOX IB-231StU3 external USB hard disk enclosure
- added support of RaidOn dual drive RAID devices: detection of both hard disk drives / SSDs used with temperature, health and complete self-monitoring S.M.A.R.T. information
- Supported devices: RaidOn iR2623-S3, iR2772-S3, iR2771-S3, iR2770, iR2022, iR2622, SR2611-2S-S2R+, GR3680-SB3
- added support of Oyen Digital MiniPro RAID V3 enclosure and SilverStone TS231U-C enclosure: detect complete disk status of both hard disk drives / SSDs used in both standalone and any RAID mode
- improved support of ADATA SX8200NP NVMe M.2 SSD (previous version may showed 0% health)
- improved detection and display of Crucial P1 M.2 NVMe SSD, HP SSD EX920 1TB, XPG GAMMIX S11 and various NVMe M.2 SSDs
- improved detection with Intel SMART Response Technology (SSD cache) with newer Intel RAID drivers
- improved support of Intel SSDSC2KW120H6 SSD, ADATA SP550 SSD, SK Hynix SSDs, Kingspec SSDs, LiteON SSDs
- improved support of ADATA SU650 SSD, KINGSTON RBUSNS8280S3128GH2 SSD, Seagate Barracuda SSDs, Intel SSDPEKNW512G8
- improved support of Adaptec SAS/SATA RAID controllers
- improved support of 3ware 9650 SATA, 9690 SATA/SAS RAID controllers
- improved support of Sandisk SD8TB8UxxxG1001, SD8TN8UxxxG1001, SD9SN8W-xxxG-1006 models
- improved compatibility with MO (Magneto-optical) drives, Lexar Jumpdrive F35 pendrives
- improved disk drive temperature display on HP RAID controllers
- improved support of multi-disk enclosures / docking stations with JMicron chipset and ASMEDIA chipset
- improved NVMe status detection under Windows 7 with Intel RST driver 15.7 (available from Support -> Driver Zone)
- improved compatibility with HP SAS Expander
- improved support of VLI 711 USB-ATA chipset
- improved power on time reporting on TOSHIBA MQ01ABD100, FUJITSU MHY2250BH, HUS726040ALS214 and various SAS hard disk drives
- reporting correct health for WD BLUE SSDs (previous version may showed 1% health)
- added support of Apacer AS330 Panther
- detection of UASP transfer mode on double (multi-drive) docking stations
- fixed: detect multiple NVMe SSD status on Intel VROC when SSDs are in standalone (non-RAID) configuration
Bug fixes, further modifications:
- improved display during surface test: show surface reinitialization level, show disk number in title
display disk comment in random seek test window instead of acoustic level (if comment defined)
- transfer rate tray icon (when enabled) automatically shows transfer rate in MB/sec instead of KB/s when the value is at least 1 MB/sec
- improved display of SCSI/SAS disks in "Load status of offline disks" window
- improved authentic report saving
- improved support and display of Arabic, Korean language
- complete Greek help (thanks for Michael I. Goudevenos for the translation)
- drives un-selected (hidden) from main window are not selected in save authentic report window
- fixed Windows OS type detection on 64 bit Windows 10 systems
- minor changes, modifications
更新時間：2019-03-20
更新細節：
What's new in this version:
Improved:
- 'Remixed by' internal field are now may be mapped to REMIXEDBY or MIXARTIST (Traktor Pro) tag field
- 'Open file location' command works more clearly and don't create additional explorer.exe instances
Fixed:
- Calculation of duration for files with several ID3v2 tags
- Not all placeholders available in Export scripts
- Case change feature failed on some locales
Translation:
- Bulgarian
更新時間：2019-02-06
更新細節：
What's new in this version:
- Improved: Autonumbering wizard are now saves settings
- Improved: MEDIATYPE field now imported from online services
- Improved: All previews are now updated in real time on Transformations selection
- Fixed: Memory leak in scripting engine cause "Out of memory" error
- Starting work to make program more friendly for screen readers
- Updated playbak engine
- Translation: Japanese, Bulgarian, German, Norwegian, Czech
更新時間：2018-11-15
更新細節：
What's new in this version:
- Transformation with Format value now may be used to generate fields with predefined value
- New function: ansi(x) returns X with all characters normalized with system codepage
- Removed tracktype.org service import - because it's not work anymore
- Added vgmdb.net (Video Games Music Database) to list of servers for FreeDB/CDDB technology
- Updated support for DSDIFF format
- Translation: Chinese Simplified