HandBrake 歷史版本列表
HandBrake (32-bit)HandBrake (64-bit)
更新時間：2016-01-23
更新細節：
What's new in this version:
- Various bug fixes for all platforms and the core engine
- Updated x265 to 1.8 which brings numerous bug fixes and some performance improvements.
更新時間：2016-01-23
更新細節：
What's new in this version:
- Various bug fixes for all platforms and the core engine
- Updated x265 to 1.8 which brings numerous bug fixes and some performance improvements
更新時間：2015-06-10
更新細節：
更新時間：2015-06-10
更新細節：
更新時間：2015-03-09
更新細節：
What's new in this version:
- Various bug fixes for all platforms and the core engine
- Updated x265 to 1.5 which brings numerous bug fixes and some performance improvements
更新時間：2015-03-09
更新細節：
What's new in this version:
- Various bug fixes for all platforms and the core engine
- Updated x265 to 1.5 which brings numerous bug fixes and some performance improvements
更新時間：2014-11-23
更新細節：
What's new in this version:
General:
Core:
- Intel QuickSync Video Encode / Decode support: Windows only currently. We hope to bring this to Linux in the future but not for 0.10
- DXVA Hardware Decode support (Experimental): Windows Only. Suitable only for slower machines so disabled in preferences by default
- Removed mcdeint deinterlace and decomb modes. This relied on the snow encoder in libav which has been was removed by upstream.
- Bug fixes and Misc Improvements
Choice of Scalers:
Lanczos:
- HandBrake's default scaler
Bicubic (OpenCL) (Experimental):
- Available on the Command Line (All Platforms) and Windows GUI. (Mac / Linux GUI's will come in a later release)
- Currently only available in OpenCL form so requires a AMD or Intel GPU supporting OpenCL 1.1 or later. Nvidia GPU's are not currently supported
- When downscaling, up to 5% performance improvement can be achieved. No benefit when not downscaling
- Small loss in quality over the Lanczos scaler
Denoise:
- hqdn3d filter now accepts individual settings for both chroma channels (Cr, Cb)
- New NLMeans denoiser. This is very slow, but results are significantly better than hqdn3d
Presets:
- Added Windows Phone 8 Preset
Updated Libraries:
- x264 r2479-dd79a61
- Libav v10.1
- libbluray 0.5.0
Libavformat is now used for muxing instead of mp4v2 and libmkv:
- "Large File Size" checkbox has now bee removed for mp4, as the new muxer will transition to 64bit files automatically
- mpeg2dec has also been replaced in favour of using libav
The LibAV AAC encoder is now the default as FAAC has been removed:
- This encoder is adequate for most, but until it improves a bit further, we have enabled support for the FDK-AAC encoder also. This FDK option is a temporary measure until the LibAV encoder improves. Note that FDK-AAC is much slower and will likely bottleneck the encode process, but will produce better quality audio
H.265 encoder
- is now available through x265 1.4. While this encoder is still fairly new, we have seen some promising results come out of it. It's still under heavy active development and is only going to improve over time!
Added VP8 Encoder (using libvpx)
- Available in MKV files only
Windows:
Accessibility / Usability Improvements:
- Added option to 'Use System Colors'. The app should now be more usable in a High Contrast mode
- Fixed Tab ordering to make the app more keyboard friendly
LibHB is now used for scanning instead of the CLI:
- Experiential Preview window is now available as a result (Can be enabled via preferences)
Improved the layout and design of the Audio and Subtitle tabs:
- Split buttons similar to the old 0.9.8 WinForms? GUI
- Improved layout on the track listbox to make better use of the space
Improvements to Auto-Naming feature:
- When Done: Added an option that will reset this to 'Do nothing' when the app is closed and restarted
Presets:
- New 'Presets' Menu
- Presets bar can now be hidden if it's not wanted
Numerous bug fixes:
- Fixed the Issue in the source dropdown where the drive menu items did not work when clicked
- Numerous fixes in the Picture settings panel around resolution calculation
- Numerous fixes around the way Presets are loaded and saved, particularly around Picture settings
- Removed Growl for Windows support due to bugs and issues with this library that remain unfixed. Project appears abandoned
- Many misc other fixes
- Windows XP is no longer supported. Windows Vista with Service Pack 2 or later is now a requirement
- The 32bit build of the application is now considered deprecated. This is due to 32bit process memory limitations
Command Line Interface:
- Basic support for return codes from the CLI. (0 = No Error, 1 = Cancelled, 2 = Invalid Input, 3 = Initialization error, 4 = Unknown Error")
- Bug fixes and Misc Improvements
更新時間：2014-11-23
更新細節：
What's new in this version:
General:
Core:
- Intel QuickSync Video Encode / Decode support: Windows only currently. We hope to bring this to Linux in the future but not for 0.10
- DXVA Hardware Decode support (Experimental): Windows Only. Suitable only for slower machines so disabled in preferences by default
- Removed mcdeint deinterlace and decomb modes. This relied on the snow encoder in libav which has been was removed by upstream.
- Bug fixes and Misc Improvements
Choice of Scalers:
Lanczos:
- HandBrake's default scaler
Bicubic (OpenCL) (Experimental):
- Available on the Command Line (All Platforms) and Windows GUI. (Mac / Linux GUI's will come in a later release)
- Currently only available in OpenCL form so requires a AMD or Intel GPU supporting OpenCL 1.1 or later. Nvidia GPU's are not currently supported
- When downscaling, up to 5% performance improvement can be achieved. No benefit when not downscaling
- Small loss in quality over the Lanczos scaler
Denoise:
- hqdn3d filter now accepts individual settings for both chroma channels (Cr, Cb)
- New NLMeans denoiser. This is very slow, but results are significantly better than hqdn3d
Presets:
- Added Windows Phone 8 Preset
Updated Libraries:
- x264 r2479-dd79a61
- Libav v10.1
- libbluray 0.5.0
Libavformat is now used for muxing instead of mp4v2 and libmkv:
- "Large File Size" checkbox has now bee removed for mp4, as the new muxer will transition to 64bit files automatically
- mpeg2dec has also been replaced in favour of using libav
The LibAV AAC encoder is now the default as FAAC has been removed:
- This encoder is adequate for most, but until it improves a bit further, we have enabled support for the FDK-AAC encoder also. This FDK option is a temporary measure until the LibAV encoder improves. Note that FDK-AAC is much slower and will likely bottleneck the encode process, but will produce better quality audio
H.265 encoder
- is now available through x265 1.4. While this encoder is still fairly new, we have seen some promising results come out of it. It's still under heavy active development and is only going to improve over time!
Added VP8 Encoder (using libvpx)
- Available in MKV files only
Windows:
Accessibility / Usability Improvements:
- Added option to 'Use System Colors'. The app should now be more usable in a High Contrast mode
- Fixed Tab ordering to make the app more keyboard friendly
LibHB is now used for scanning instead of the CLI:
- Experiential Preview window is now available as a result (Can be enabled via preferences)
Improved the layout and design of the Audio and Subtitle tabs:
- Split buttons similar to the old 0.9.8 WinForms? GUI
- Improved layout on the track listbox to make better use of the space
Improvements to Auto-Naming feature:
- When Done: Added an option that will reset this to 'Do nothing' when the app is closed and restarted
Presets:
- New 'Presets' Menu
- Presets bar can now be hidden if it's not wanted
Numerous bug fixes:
- Fixed the Issue in the source dropdown where the drive menu items did not work when clicked
- Numerous fixes in the Picture settings panel around resolution calculation
- Numerous fixes around the way Presets are loaded and saved, particularly around Picture settings
- Removed Growl for Windows support due to bugs and issues with this library that remain unfixed. Project appears abandoned
- Many misc other fixes
- Windows XP is no longer supported. Windows Vista with Service Pack 2 or later is now a requirement
- The 32bit build of the application is now considered deprecated. This is due to 32bit process memory limitations
Command Line Interface:
- Basic support for return codes from the CLI. (0 = No Error, 1 = Cancelled, 2 = Invalid Input, 3 = Initialization error, 4 = Unknown Error")
- Bug fixes and Misc Improvements
更新時間：2013-05-18
更新細節：
What's new in this version:
General
- Improved HandBrake pineapple icon by Matt Johnson
- Improved Retina-resolution icons within the application, by Nik Pawlak
Core
- Blu-ray (PGS) subtitle support: works with Foreign Audio Search, can be Burned-In, can be passed through to MKV (but not MP4)
- Additional video framerates: 30, 50, 59.94, 60 fps
- Double framerate ("bob") mode for the deinterlace and decomb filters
- Better audio remix support
- Allow the selection of higher audio bitrates where appropriate
- Allow the selection of lower audio samplerates where appropriate: 8, 11.025, 12, 16 kHz
- Audio dithering (TPDF) when converting to 16-bit FLAC
- Use libavcodec for DTS audio decoding (instead of libdca): DTS-ES 6.1 Discrete support
- All graphical interfaces: support for x264's preset, tune and profile options: alternative to the Advanced panel (which is still available), HandBrake-specific option to ensure compliance with a specific H.264 level
- Updated built-in presets: take advantage of x264 preset/tune/profile support, removed increasingly suboptimal and irrelevant Legacy presets
- Assorted bug fixes and improvements to the core library (libhb)
- Updated libraries
- x264 r2273-b3065e6
- Libav v9.6
- libbluray 0.2.3
Windows
- User Interface has been re-written in WPF (Includes many small UI enhancements)
- Switched to .NET 4 Client Profile (smaller download for those who don't have .NET 4 Full installed)
Mac
- Assorted bug fixes including better support for Retina displays
- Prevent sleep during encoding and scanning for Mountain Lion
- Drag & Drop files onto the Main window or application icon to scan
- Nicer progress indication on the dock icon
- Preview window improvements and bugfixes
- Updated Growl to 2.0.1: Notification Center support (when Growl is not installed)
Linux
- Assorted bug fixes and improvements
- Use some system libraries rather than bundling: fontconfig, freetype, libxml2, libass, libogg, libvorbis, libtheora and libsamplerate
Command Line Interface
- Audio option (-a) will ignore invalid input tracks and encode with only the valid ones
- Allow use of hh:mm:ss format when specifying p-to-p start/stop time
- Advanced audio options: enable level normalization when downmixing (disabled by default), disable audio dithering or select a specific algorithm
更新時間：2013-05-18
更新細節：
What's new in this version:
General
- Improved HandBrake pineapple icon by Matt Johnson
- Improved Retina-resolution icons within the application, by Nik Pawlak
Core
- Blu-ray (PGS) subtitle support: works with Foreign Audio Search, can be Burned-In, can be passed through to MKV (but not MP4)
- Additional video framerates: 30, 50, 59.94, 60 fps
- Double framerate ("bob") mode for the deinterlace and decomb filters
- Better audio remix support
- Allow the selection of higher audio bitrates where appropriate
- Allow the selection of lower audio samplerates where appropriate: 8, 11.025, 12, 16 kHz
- Audio dithering (TPDF) when converting to 16-bit FLAC
- Use libavcodec for DTS audio decoding (instead of libdca): DTS-ES 6.1 Discrete support
- All graphical interfaces: support for x264's preset, tune and profile options: alternative to the Advanced panel (which is still available), HandBrake-specific option to ensure compliance with a specific H.264 level
- Updated built-in presets: take advantage of x264 preset/tune/profile support, removed increasingly suboptimal and irrelevant Legacy presets
- Assorted bug fixes and improvements to the core library (libhb)
- Updated libraries
- x264 r2273-b3065e6
- Libav v9.6
- libbluray 0.2.3
Windows
- User Interface has been re-written in WPF (Includes many small UI enhancements)
- Switched to .NET 4 Client Profile (smaller download for those who don't have .NET 4 Full installed)
Mac
- Assorted bug fixes including better support for Retina displays
- Prevent sleep during encoding and scanning for Mountain Lion
- Drag & Drop files onto the Main window or application icon to scan
- Nicer progress indication on the dock icon
- Preview window improvements and bugfixes
- Updated Growl to 2.0.1: Notification Center support (when Growl is not installed)
Linux
- Assorted bug fixes and improvements
- Use some system libraries rather than bundling: fontconfig, freetype, libxml2, libass, libogg, libvorbis, libtheora and libsamplerate
Command Line Interface
- Audio option (-a) will ignore invalid input tracks and encode with only the valid ones
- Allow use of hh:mm:ss format when specifying p-to-p start/stop time
- Advanced audio options: enable level normalization when downmixing (disabled by default), disable audio dithering or select a specific algorithm