Cloudevo 歷史版本列表
更新時間：2020-10-22
更新細節：
What's new in this version:
Cloudevo 3.5.6
- Fixed problems connecting and synchronizing data
Cloudevo 3.5.4
Changes and fixes:
- When Cloudevo was newly set up on another computer, the added cloud storage accounts were only shown after a delay
Cloudevo 3.5.3
Changes and fixes:
- Additional user accounts could not be created
Cloudevo 3.5.2
New features and improvements
- More reliable synchronization between devices
- Faster synchronization between devices
- Faster synchronization of large amounts of data
- More reliable and efficient synchronization of large amounts of data
- Improved compatibility for operation on Windows 7 and Windows 8 where updates have not been installed
- Transition from Windows SecureChannel to OpenSSL
- Translation revised and expanded
Changes and fixes:
- Clearing routine of cloud storage service HiDrive was faulty
- Synchronization routine has been sporadically suspended in continuous operation
- Fixed a bug that permanently prevented synchronization
Cloudevo 3.5.1
New features and improvements:
- More reliable synchronization between devices
- Reduced CPU utilization
Changes and fixes:
- Files over 16 MB had to be repeatedly downloaded after a restart
Cloudevo 3.5.0
New features and improvements:
- Update the library for encrypted transmissions
- Support for TLS v1.3 for encrypted connections
Changes and fixes:
- Error during encrypted connection to G-Drive under Windows 7
Cloudevo 3.4.9
New features and improvements:
- The software now has a digital signature so that the warning message about unknown publisher does not appear.
Cloudevo 3.4.8
New features and improvements:
- Permissions to access files are now recursively set, so that all files in the folder get the same authorization
Changes and fixes
- correction incomplete synchronization
- When sharing folders, only files that were previously loaded were released
- When cutting files from the Cloudevo drive, files were deleted instead of being copied out
- Transfers were sporadically blocked by internal errors
- The Cloudevo drive was not loaded on corrupted files in the file system, but blocked
Cloudevo 3.4.7
New features and improvements:
- Permissions to access files are now recursively set, so that all files in the folder get the same authorization
Changes and fixes:
- When sharing folders, only files that were previously loaded were released
- When cutting files from the Cloudevo drive, files were deleted instead of being copied out
- Transfers were sporadically blocked by internal errors
- The Cloudevo drive was not loaded on corrupt files in the file system, but blocked
Cloudevo 3.4.5
New features and improvements:
- Mehrere Fehler korrigiert, die zum Absturz geführt hatten
- Schnellere Synchronisierung zwischen Geräten
- Update auf neue Schnittstelle für MagentaCloud
Cloudevo 3.4.3 Build 5745347
New features and improvements:
- Support of the new interface of the cloud storage service MegaNZ. New MegaNZ users from November 2018 are now also supported
Cloudevo 3.4.1 Build 5206464
New features and improvements:
- Faster synchronization of large amounts of data
- More reliable and more efficient synchronization of large amounts of data
- Faster extinguishing process
- Lower memory consumption
Changes and fixes:
- Administrator can no longer be deleted from the permissions. Administrator always has access to all files
- Deleting files sporadically crashed during sync
- Drive reported incorrect space usage and space shortage after deleting files
- Sporadically occurring file transfer suspension has been fixed
Cloudevo 3.4.0 Build 5302940
New features and improvements:
- Transfer pipelining: Improved transmission technology enables significantly higher transfer rates (upload / download)
Changes and fixes:
- Cloudevo drive up spontaneously and files were not retrievable until reboot
- Application crash if all connected cloud storage services were overcrowded or unavailable
- Sporadic errors when adding new cloud storage accounts
Cloudevo 3.3.1.18257
New features and improvements:
- Strato HiDrive In addition to the account identifier, the user name is now also displayed
- Check at startup whether the Cloudevo disk driver is installed correctly
- No need to restart after updates
Changes and fixes:
- Spontaneous crashes of the software when it starts up
Cloudevo 3.3.0.18252
Note:
- This version is backwards compatible with previous versions: 3.2.6 - 3.0.4
New features and improvements:
- Strato HiDrive accounts are now accessed via the HiDrive REST API. This means that you can also connect HiDrive Paid offers with Cloudevo without the need for optional WebDAV
Changes and fixes:
- Directories that were moved into themselves were no longer displayed.. Now an error is displayed when moving directories within themselves
Cloudevo 3.2.6.18196
- Note: Important note Hubic users
- The cloud storage service Hubic has announced to discontinue its services. Cloudevo users using Hubic should enable Cloud RAID and gradually remove Hubic accounts. Your files are distributed to the other cloud storage services.
- New features and improvements
- Cloud storage service Hubic has been removed from Cloudevo
Cloudevo 3.2.5.18176
New features and improvements:
- Adaptation to the new MagentaCloud interface
- Hints when setting up MagentaCloud
Cloudevo 3.2.3.18155
- Reliable synchronization of new devices
- Entering new and changing existing Cloudevo licenses
- Better stability with large data volumes
Cloudevo 3.2.2.18129
- Choosing your own bucket under Google Cloud Storage for use with Cloudevo
- New certificates for encrypted transmission
Cloudevo 3.2.1.18096
- Change log not available for this version
Cloudevo 3.2.0.18093
New features and improvements:
- Compatibility with Windows 10 Spring Creator Update (version 1803)
- New cloud storage service: Google Cloud Storage
- New cloud storage service: Microsoft Azure File Storage
- New cloud storage service: Telekom Azure File Storage
- Enhanced documentation for user management and file sharing
- Introduce business licenses for companies with unlimited number of devices and user subaccounts
- Expanded documentation for setting up Google Cloud Storage and Microsoft Azure File Storage
- Acceleration of file transfers
- Network function available again: Exchange of files in the local network
- Network function: Automatic connection of all devices at program start
- Network feature: Manually add network devices and store autoconnected connections
- Network Function: Connect and disconnect the network connection to network devices within the session
- Network Feature: New progress bar when searching for other network devices
- Reduced storage space usage
- Select a free drive letter during initial setup
- Reliable display of context menu and commands in Windows Explorer
- Unnecessary security queries removed in the user management
Changes and fixes:
- Repeated change of own password was denied
- Repeatedly changing a user password was sporadically denied
- Incorrect progress display when downloading files from cloud storage pCloud
- Failure due to race in network function crashed the software sporadically
- Synchronization icons in Windows Explorer were not displayed correctly sporadically
- Synchronization icons in Windows Explorer were not displayed for some users
- Sporadically missing synchronization of the data stock due to internal deadlock
- Disappear files by incorrectly setting access rights on older accounts
- Error messages were displayed twice in the file transfer window
- Sporadically missing file transmissions due to internal deadlock
- Sporadic delays during file transfers
- Saving some settings was not saved across sessions
Cloudevo 3.1.4.18014
New features and improvements:
- Upload/download optimizations
- Adjustments in the graphical representation of toggle and switch elements
Changes and fixes:
- Cloud RAID group settings were not saved correctly
Cloudevo 3.1.4.17345
New features and improvements:
- Upload/Download optimizations
- Adjustments in the graphical representation of toggle and switch elements
Changes and fixes:
- Cloud RAID group settings and assignments were not saved correctly
Cloudevo 3.1.3.17301
- Adaptations for improved compatibility with the web app, Android app and Windows 10 Mobile App
- Improved performance for the cloud drive
- Automatic assignment of new drive letters for the cloud drive if the allocated drive is already in use
- Changes and fixes
- Creating new Cloudevo accounts with email addresses did not produce any error, although not allowed
Cloudevo 3.1.2.17296
- Note: This version is backwards compatible with previous versions: 3.1.1 - 3.0.4
New features and improvements:
- New protocol: Connections to SMB and CIFS shares
- Reduced memory consumption
- Improved performance for the cloud drive: Files can be read faster
Cloudevo 3.1.0.17286
- Note: This version is backwards compatible with previous versions: 3.0.8 - 3.0.4
- Note: Please read the note below to encryption the local cache
- This version is not compatible with the current version of Cloudevo for Android: Logon with subaccounts is not possible. An update will follow shortly
New features and improvements:
- New: user management! Create, manage and delete user accounts
- New: User groups! Merging user accounts into groups and assigning permissions
- New: Cryptographic permissions! Setting read and write permissions for each user
- Assign storage space to each user account
- Assigning a letter to the cloud drive, taking into account the current allocation
- More reliable synchronization
- Reduced space consumption on the local hard disk drive
- Improved file share compatibility for Edge
- Freeware users can continue to access their files after exceeding the restrictions
- Protective function prevents the application from getting stuck
- Higher application stability
- Adaptations for the login in the WebApp
Changes and fixes:
- Cloud drive was occasionally not displayed because the background service did not start correctly
- The encryption of the local cache had an error in previous versions, which partially destroyed the files in the cache. Disable the encryption of the local cache before the update. Wait until decryption is complete. Only then you should install the update. After the update, check all files in the drive to see if they still contain broken files. Delete all corrupted files and then reinsert them into the cloud drive
Cloudevo 3.0.7.17275
- Kompatibilität mit dem Windows 10 Fall Creators Update
- Kompatibilität mit dem Windows 10 Preview 16299
- Higher application stability
- Anpassung an die neue Schnittstelle von Microsoft OneDrive
Cloudevo 3.0.6.17275
New features and improvements:
- Sharing files and folders for arbitrary access
- Releases can be limited in the number of downloads
- Approvals can be provided with an expiration date
- Faster and more reliable uploads (taking into account daily limits and restrictions)
- Driver update: More stable and faster
- Higher application stability
Changes and fixes:
- Correction in licensing of Pro Licenses
Cloudevo 3.0.5.17273
- Correction in licensing of Pro Licenses
Cloudevo 3.0.4.17255
- Upload/Download Optimierung für Cloud-Speicher MEGA und 4Shared
- Higher application stability
- Optimization: Higher transfer speeds
Cloudevo 3.0.3.17248
New features and improvements:
- Software now supports HTTP, SSL, Socks4 and Socks5 proxies
- Optimization: Faster mirroring of files using cloud RAID
- Optimization: Clean up cloud storage faster
- Cloud RAID now also available for free accounts
Changes and fixes:
- Cloud storage accounts were sometimes displayed without associated email addresses
Cloudevo 3.0.2.17240
New features and improvements:
- Higher application stability
- Higher transfer speeds
- Faster synchronization
- Compatibility with other platforms: Android, iOS, Windows Mobil
- Reduced work memory usage during transfer
- Cleanup routine for deleting data on cloud storage
- Cloud RAID now available for free accounts
Changes and fixes:
- Fixed bug when adding Dropbox, and Google Drive
- Faster data transfer for the MEGA cloud service
- Fault has been corrected: Data transfer temporarily suspende
- Fault has been corrected: Automatic desynchronization did not wor
- Fault has been corrected: Cloud drive was occasionally not displayed in Windows Explorer
Cloudevo 2.5.3.17171
New features and improvements:
- Higher application stability
- PowerFolder API interface update: Faster calls and higher transfer rates
- Improved error reporting on Google accounts
- Higher transfer speeds
Changes and fixes:
- Adaptations to the integrity check routine
- Uploads via WebDAV have been interrupted sporadically due to timeouts
- Intermittent interruption or stop of uploads / downloads fixed
- Fix: Occasionally freezing of Windows Explorer under Windows 7 when working in the cloud drive
- Settings for automatic synchronization were saved but not loaded correctly
- Fix: Crash of the application or disappear of the drive
Cloudevo 2.4.8.17163
New features and improvements:
- Cloud storage HiDrive can now also be used with paid user accounts
Changes and fixes:
- Cloud storage pCloud: Special characters in the password prevented correct authentication
- Adding cloud storage accounts failed when slow Internet connection
Cloudevo 2.4.7.17159
New features and improvements:
- Cloud storage MEGA again added
- Higher stability
- Notes in the program for transfer volumes and automatic backups
更新時間：2020-02-07
更新細節：
What's new in this version:
Bug Fixes:
- Curio now performs 2mm Kraft blade action
- Studio no longer crashes when opening embroidery files
- Punches are now displayed in voids in overlapping compound paths and in the correct areas of surrounded paths.
- Studio no longer crashes when switching between layers after adding the punch tool
- Studio no longer crashes when machine becomes disconnected during Punch job
- Punch tool is no longer performed when not enabled
- Icon for Punch action buttons has been changed
- Punch is now generating marks on larger regions
- Punch Tool now ignores Weed Lines and Lines with 'No Cut' or 'Pen' actions
- Punch Marks no longer show when you connect a Cameo 4 without a Punch Tool
- Punch tool action no longer disappears if you disable it
- Punch Tool is now called the correct name
- You can no longer send a design to be 'cut out' by the punch tool
- Adding weed lines to a design no longer places the punch tool holes in the wrong place
- Removed the tool selection for punch tool
- Added Punch actions to Default Materials
- Made Punch holes easier to see on Send Panel Preview
- Punch settings are no longer being displayed on materials without the punch action Updated the speed of the default Punch actions
- Improved backward compatibility of files saved with Kraft Blade, Rotary Blade & Punch Tool settings
- A large punch icon no longer appears when using Select by Line
- An offset is no longer being applied to punch edge
- Auto (Punch) action will not produce punch marks if Punch is set to Auto
更新時間：2020-02-07
更新細節：
What's new in this version:
New:
- Added the support for some new Java protections
- Improved the user experience on the burning feature
Fix:
- A problem that the Clear History feature at the Finished Task panel does not work properly
- A blurry screen problem on the burnt DVDs during playback
- A problem that the 2-Pass and CRF encoding methods do not work if the Codec is selected as VP9 at the Advanced Settings panel of the Blu-ray Ripper and Video Converter modules
- A problem that the menu cannot be previewed in the Blu-ray Creator module
- A problem that the Info button that appears after a conversion task does not work
- A conversion failure problem with Enlarger AI if users choose to overwrite the existing file in the output directory
- A conversion failure problem when upscaling DVDs with Enlarger AI using the MKV.AI profile
更新時間：2020-02-07
更新細節：
What's new in this version:
Cloudevo 3.5.3
Changes and fixes:
- Additional user accounts could not be created
Cloudevo 3.5.2
New features and improvements
- More reliable synchronization between devices
- Faster synchronization between devices
- Faster synchronization of large amounts of data
- More reliable and efficient synchronization of large amounts of data
- Improved compatibility for operation on Windows 7 and Windows 8 where updates have not been installed
- Transition from Windows SecureChannel to OpenSSL
- Translation revised and expanded
Changes and fixes:
- Clearing routine of cloud storage service HiDrive was faulty
- Synchronization routine has been sporadically suspended in continuous operation
- Fixed a bug that permanently prevented synchronization
Cloudevo 3.5.1
New features and improvements:
- More reliable synchronization between devices
- Reduced CPU utilization
Changes and fixes:
- Files over 16 MB had to be repeatedly downloaded after a restart
Cloudevo 3.5.0
New features and improvements:
- Update the library for encrypted transmissions
- Support for TLS v1.3 for encrypted connections
Changes and fixes:
- Error during encrypted connection to G-Drive under Windows 7
Cloudevo 3.4.9
New features and improvements:
- The software now has a digital signature so that the warning message about unknown publisher does not appear.
Cloudevo 3.4.8
New features and improvements:
- Permissions to access files are now recursively set, so that all files in the folder get the same authorization
Changes and fixes
- correction incomplete synchronization
- When sharing folders, only files that were previously loaded were released
- When cutting files from the Cloudevo drive, files were deleted instead of being copied out
- Transfers were sporadically blocked by internal errors
- The Cloudevo drive was not loaded on corrupted files in the file system, but blocked
Cloudevo 3.4.7
New features and improvements:
- Permissions to access files are now recursively set, so that all files in the folder get the same authorization
Changes and fixes:
- When sharing folders, only files that were previously loaded were released
- When cutting files from the Cloudevo drive, files were deleted instead of being copied out
- Transfers were sporadically blocked by internal errors
- The Cloudevo drive was not loaded on corrupt files in the file system, but blocked
Cloudevo 3.4.5
New features and improvements:
- Mehrere Fehler korrigiert, die zum Absturz geführt hatten
- Schnellere Synchronisierung zwischen Geräten
- Update auf neue Schnittstelle für MagentaCloud
Cloudevo 3.4.3 Build 5745347
New features and improvements:
- Support of the new interface of the cloud storage service MegaNZ. New MegaNZ users from November 2018 are now also supported
Cloudevo 3.4.1 Build 5206464
New features and improvements:
- Faster synchronization of large amounts of data
- More reliable and more efficient synchronization of large amounts of data
- Faster extinguishing process
- Lower memory consumption
Changes and fixes:
- Administrator can no longer be deleted from the permissions. Administrator always has access to all files
- Deleting files sporadically crashed during sync
- Drive reported incorrect space usage and space shortage after deleting files
- Sporadically occurring file transfer suspension has been fixed
Cloudevo 3.4.0 Build 5302940
New features and improvements:
- Transfer pipelining: Improved transmission technology enables significantly higher transfer rates (upload / download)
Changes and fixes:
- Cloudevo drive up spontaneously and files were not retrievable until reboot
- Application crash if all connected cloud storage services were overcrowded or unavailable
- Sporadic errors when adding new cloud storage accounts
Cloudevo 3.3.1.18257
New features and improvements:
- Strato HiDrive In addition to the account identifier, the user name is now also displayed
- Check at startup whether the Cloudevo disk driver is installed correctly
- No need to restart after updates
Changes and fixes:
- Spontaneous crashes of the software when it starts up
Cloudevo 3.3.0.18252
Note:
- This version is backwards compatible with previous versions: 3.2.6 - 3.0.4
New features and improvements:
- Strato HiDrive accounts are now accessed via the HiDrive REST API. This means that you can also connect HiDrive Paid offers with Cloudevo without the need for optional WebDAV
Changes and fixes:
- Directories that were moved into themselves were no longer displayed.. Now an error is displayed when moving directories within themselves
Cloudevo 3.2.6.18196
- Note: Important note Hubic users
- The cloud storage service Hubic has announced to discontinue its services. Cloudevo users using Hubic should enable Cloud RAID and gradually remove Hubic accounts. Your files are distributed to the other cloud storage services.
- New features and improvements
- Cloud storage service Hubic has been removed from Cloudevo
Cloudevo 3.2.5.18176
New features and improvements:
- Adaptation to the new MagentaCloud interface
- Hints when setting up MagentaCloud
Cloudevo 3.2.3.18155
- Reliable synchronization of new devices
- Entering new and changing existing Cloudevo licenses
- Better stability with large data volumes
Cloudevo 3.2.2.18129
- Choosing your own bucket under Google Cloud Storage for use with Cloudevo
- New certificates for encrypted transmission
Cloudevo 3.2.1.18096
- Change log not available for this version
Cloudevo 3.2.0.18093
New features and improvements:
- Compatibility with Windows 10 Spring Creator Update (version 1803)
- New cloud storage service: Google Cloud Storage
- New cloud storage service: Microsoft Azure File Storage
- New cloud storage service: Telekom Azure File Storage
- Enhanced documentation for user management and file sharing
- Introduce business licenses for companies with unlimited number of devices and user subaccounts
- Expanded documentation for setting up Google Cloud Storage and Microsoft Azure File Storage
- Acceleration of file transfers
- Network function available again: Exchange of files in the local network
- Network function: Automatic connection of all devices at program start
- Network feature: Manually add network devices and store autoconnected connections
- Network Function: Connect and disconnect the network connection to network devices within the session
- Network Feature: New progress bar when searching for other network devices
- Reduced storage space usage
- Select a free drive letter during initial setup
- Reliable display of context menu and commands in Windows Explorer
- Unnecessary security queries removed in the user management
Changes and fixes:
- Repeated change of own password was denied
- Repeatedly changing a user password was sporadically denied
- Incorrect progress display when downloading files from cloud storage pCloud
- Failure due to race in network function crashed the software sporadically
- Synchronization icons in Windows Explorer were not displayed correctly sporadically
- Synchronization icons in Windows Explorer were not displayed for some users
- Sporadically missing synchronization of the data stock due to internal deadlock
- Disappear files by incorrectly setting access rights on older accounts
- Error messages were displayed twice in the file transfer window
- Sporadically missing file transmissions due to internal deadlock
- Sporadic delays during file transfers
- Saving some settings was not saved across sessions
Cloudevo 3.1.4.18014
New features and improvements:
- Upload/download optimizations
- Adjustments in the graphical representation of toggle and switch elements
Changes and fixes:
- Cloud RAID group settings were not saved correctly
Cloudevo 3.1.4.17345
New features and improvements:
- Upload/Download optimizations
- Adjustments in the graphical representation of toggle and switch elements
Changes and fixes:
- Cloud RAID group settings and assignments were not saved correctly
Cloudevo 3.1.3.17301
- Adaptations for improved compatibility with the web app, Android app and Windows 10 Mobile App
- Improved performance for the cloud drive
- Automatic assignment of new drive letters for the cloud drive if the allocated drive is already in use
- Changes and fixes
- Creating new Cloudevo accounts with email addresses did not produce any error, although not allowed
Cloudevo 3.1.2.17296
- Note: This version is backwards compatible with previous versions: 3.1.1 - 3.0.4
New features and improvements:
- New protocol: Connections to SMB and CIFS shares
- Reduced memory consumption
- Improved performance for the cloud drive: Files can be read faster
Cloudevo 3.1.0.17286
- Note: This version is backwards compatible with previous versions: 3.0.8 - 3.0.4
- Note: Please read the note below to encryption the local cache
- This version is not compatible with the current version of Cloudevo for Android: Logon with subaccounts is not possible. An update will follow shortly
New features and improvements:
- New: user management! Create, manage and delete user accounts
- New: User groups! Merging user accounts into groups and assigning permissions
- New: Cryptographic permissions! Setting read and write permissions for each user
- Assign storage space to each user account
- Assigning a letter to the cloud drive, taking into account the current allocation
- More reliable synchronization
- Reduced space consumption on the local hard disk drive
- Improved file share compatibility for Edge
- Freeware users can continue to access their files after exceeding the restrictions
- Protective function prevents the application from getting stuck
- Higher application stability
- Adaptations for the login in the WebApp
Changes and fixes:
- Cloud drive was occasionally not displayed because the background service did not start correctly
- The encryption of the local cache had an error in previous versions, which partially destroyed the files in the cache. Disable the encryption of the local cache before the update. Wait until decryption is complete. Only then you should install the update. After the update, check all files in the drive to see if they still contain broken files. Delete all corrupted files and then reinsert them into the cloud drive
Cloudevo 3.0.7.17275
- Kompatibilität mit dem Windows 10 Fall Creators Update
- Kompatibilität mit dem Windows 10 Preview 16299
- Higher application stability
- Anpassung an die neue Schnittstelle von Microsoft OneDrive
Cloudevo 3.0.6.17275
New features and improvements:
- Sharing files and folders for arbitrary access
- Releases can be limited in the number of downloads
- Approvals can be provided with an expiration date
- Faster and more reliable uploads (taking into account daily limits and restrictions)
- Driver update: More stable and faster
- Higher application stability
Changes and fixes:
- Correction in licensing of Pro Licenses
Cloudevo 3.0.5.17273
- Correction in licensing of Pro Licenses
Cloudevo 3.0.4.17255
- Upload/Download Optimierung für Cloud-Speicher MEGA und 4Shared
- Higher application stability
- Optimization: Higher transfer speeds
Cloudevo 3.0.3.17248
New features and improvements:
- Software now supports HTTP, SSL, Socks4 and Socks5 proxies
- Optimization: Faster mirroring of files using cloud RAID
- Optimization: Clean up cloud storage faster
- Cloud RAID now also available for free accounts
Changes and fixes:
- Cloud storage accounts were sometimes displayed without associated email addresses
Cloudevo 3.0.2.17240
New features and improvements:
- Higher application stability
- Higher transfer speeds
- Faster synchronization
- Compatibility with other platforms: Android, iOS, Windows Mobil
- Reduced work memory usage during transfer
- Cleanup routine for deleting data on cloud storage
- Cloud RAID now available for free accounts
Changes and fixes:
- Fixed bug when adding Dropbox, and Google Drive
- Faster data transfer for the MEGA cloud service
- Fault has been corrected: Data transfer temporarily suspende
- Fault has been corrected: Automatic desynchronization did not wor
- Fault has been corrected: Cloud drive was occasionally not displayed in Windows Explorer
Cloudevo 2.5.3.17171
New features and improvements:
- Higher application stability
- PowerFolder API interface update: Faster calls and higher transfer rates
- Improved error reporting on Google accounts
- Higher transfer speeds
Changes and fixes:
- Adaptations to the integrity check routine
- Uploads via WebDAV have been interrupted sporadically due to timeouts
- Intermittent interruption or stop of uploads / downloads fixed
- Fix: Occasionally freezing of Windows Explorer under Windows 7 when working in the cloud drive
- Settings for automatic synchronization were saved but not loaded correctly
- Fix: Crash of the application or disappear of the drive
Cloudevo 2.4.8.17163
New features and improvements:
- Cloud storage HiDrive can now also be used with paid user accounts
Changes and fixes:
- Cloud storage pCloud: Special characters in the password prevented correct authentication
- Adding cloud storage accounts failed when slow Internet connection
Cloudevo 2.4.7.17159
New features and improvements:
- Cloud storage MEGA again added
- Higher stability
- Notes in the program for transfer volumes and automatic backups
更新時間：2020-02-07
更新細節：
What's new in this version:
Bug Fixes:
- Curio now performs 2mm Kraft blade action
- Studio no longer crashes when opening embroidery files
- Punches are now displayed in voids in overlapping compound paths and in the correct areas of surrounded paths.
- Studio no longer crashes when switching between layers after adding the punch tool
- Studio no longer crashes when machine becomes disconnected during Punch job
- Punch tool is no longer performed when not enabled
- Icon for Punch action buttons has been changed
- Punch is now generating marks on larger regions
- Punch Tool now ignores Weed Lines and Lines with 'No Cut' or 'Pen' actions
- Punch Marks no longer show when you connect a Cameo 4 without a Punch Tool
- Punch tool action no longer disappears if you disable it
- Punch Tool is now called the correct name
- You can no longer send a design to be 'cut out' by the punch tool
- Adding weed lines to a design no longer places the punch tool holes in the wrong place
- Removed the tool selection for punch tool
- Added Punch actions to Default Materials
- Made Punch holes easier to see on Send Panel Preview
- Punch settings are no longer being displayed on materials without the punch action Updated the speed of the default Punch actions
- Improved backward compatibility of files saved with Kraft Blade, Rotary Blade & Punch Tool settings
- A large punch icon no longer appears when using Select by Line
- An offset is no longer being applied to punch edge
- Auto (Punch) action will not produce punch marks if Punch is set to Auto
更新時間：2020-01-23
更新細節：
What's new in this version:
New:
- Added the support for some new Java protections
Fix:
- A problem that the conversion is too slow if software decoding and encoding is used in the Video Converter and Ripper modules
- A problem that the movie metadata contains incorrect release date information in the Video Converter and Ripper modules
更新時間：2020-01-15
更新細節：
What's new in this version:
New:
- Added the support for some new Java protections
Fix:
- A conversion failure problem when upscaling DVDs and videos with the Enlarger AI in certain cases
更新時間：2019-12-27
更新細節：
What's new in this version:
New:
- Added the support for some new Java protections
- Added the support for a new copy protection as found on the DVD version of Rambo: Last Blood
- Added the support to convert DVDs or other videos to HEVC videos with Enlarger AI in the DVD Ripper and Video Converter modules
- Improved the server to ensure smoother download of Enlarger AI required data files
- Improved the support for the BDInfo free utility tool
Fix:
- A crash problem when copying Blu-rays with the Full Disc and Main Movie modes in the Blu-ray Copy module in certain cases
- A failure problem when converting DVDs or other videos with Enlarger AI on certain machines
- A problem that the Video Converter module cannot convert HDR10 videos to SDR.MKV videos
- An oversize problem when making 4K Ultra HD Blu-ray of BD25 size with a 21GB MKV video in the UHD Creator module
更新時間：2019-12-13
更新細節：
What's new in this version:
New:
- Added the support for some new Java protections
- Added the support for a new copy protection as found on the DVD version of Angel Has Fallen
- Added the support to upscale DVDs and other videos to 1080p with Enlarger AI in DVD Ripper and Video Converter modules
- Added the support to upscale DVDs to Blu-rays with Enlarger AI by two different AI models (Premium Quality and Ultra Quality)
Fix:
- A problem that the firmware downgrade info still shows up for the UHD Drives that do not need to downgrade the firmware
更新時間：2019-12-10
更新細節：
What's new in this version:
New:
- Added the support for some new Java protections
- Added the support for a new copy protection as found on the DVD version of Angel Has Fallen
- Added the support for the UHD Drive Tool to downgrade firmware for both internal & external drives with USB, AHCI and IDE connections
Fix:
- A read error problem when copying and converting Blu-ray and 4K Ultra HD Blu-ray discs in certain cases