軟體下載 WinBox 3.26

Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed ...

https://mikrotik.com

Not sure if this started in 3.25 or 3.26 but we are burning through 512MB of Ram in 1.5 to 3.5 hours. Seems to get worse under heavier traffic.

https://forum.mikrotik.com

Winbox should be used to connect to the default IP address of 192.168.88.1 with the ... tested operating system is MikroTik RouterOS (starting from version 3.26).

http://www.mikrotik.com.ua

Winbox should be used to connect to the default IP address of 192.168.88.1 with the ... tested operating system is MikroTik RouterOS (starting from version 3.26).

http://balticnetworks.com

Winbox should be used to connect to the default IP address of 192.168.88.1 with the ... tested operating system is MikroTik RouterOS (starting from version 3.26).

https://lanmarket.ua

Winbox should be used to connect to the default IP address of 192.168.88.1 with the ... tested operating system is MikroTik RouterOS (starting from version 3.26).

https://ansel.com.mx

What's new in 3.26: fixed rare NAND boot failure with a crash on CloudCoreRouter boards;. What's new in 3.25: shortened display strings for ...

https://wiki.mikrotik.com

added simple/advanced mode to ppp client in WinBox; *) added ... First attempt at an upgrade to 3.26 from 3.25 on a x86 box did not succeed.

https://forum.mikrotik.com

If you try to upgrade directly from Winbox loader and version is not available, then you might need to wait for a while until cache in path ...

https://forum.mikrotik.com